Marantz SR5007 Owner's Manual page 134

Items
ZONE MAIN ZONE : This item shows information about settings for MAIN
Show information about ZONE. The information displayed differs according to the input source.
current settings. • ZONE Name / Select Source / Name / Sound Mode / Input Mode /
Decode Mode / HDMI / Digital / Component / Video Select / Video
Mode / Content Type / Video Conversion / i/p Scaler / Resolution /
Progressive Mode / Aspect Ratio etc.
ZONE2 : This item shows information about settings for ZONE2.
• ZONE Name / Power / Select Source / Volume Level
"Volume Level" for ZONE2 is displayed when "Assign Mode"
(vpage 121) is set to "ZONE2".
Firmware Version : Displays information for the current firmware.
INFO
Press to display current source name, volume, sound mode name, and other information at the
bottom of the screen.
Examples of screen display
• Status display screen
When the input source is switched. When the volume is adjusted.
CBL/SAT
AUTO DTS VIDEO
DVD
SOURCE
DTS SURROUND
SOUND
Status display: The operating status appears briefly on the screen when the input
source is switched or the volume is changed.
NOTE
The status display screen cannot be displayed at a computer's resolution (e.g. VGA) or while certain 3D
video contents is being played.
DVD
Setting details
50.0
131
Firmware
Set whether or not to check for firmware update, update the firmware, and display update and upgrade
notifications.
Setting items
Update Check for Update : Check for firmware updates. You can also check
Update the firmware of the approximately how long it will take to complete an update.
receiver. Update Start : Execute the update process.
When updating starts, the STANDBY indicator becomes red and the menu
NOTE
screen is shut down. The amount of update time which has elapsed is
In cases where it is not displayed.
possible to connect to When updating is complete, the STANDBY indicator becomes green and
the network after doing a
normal status is resumed.
firmware update, connect
• If updating fails, the set automatically retries, but if updating is still not
to the network again using
possible, one of the messages shown below is displayed. If the display
"Network" (vpage 124).
reads as shown below, check the settings and network environment,
then update again.
Display
Updating fail
Login failed
Server is busy
Connection fail
Download fail
General
Default settings are underlined.
Setting details
Description
Updating failed.
Failure to log into server.
Server is busy. Wait a while then try again.
Failure in connecting to server.
Downloading of the firmware has failed.
v See overleaf