Sharp XL-45H Operation Manual page 31

To interrupt recording:
Main unit operation:
Press the button.
To resume recording, press the button.
Remote control operation:
Press the button.
To resume recording, press the button.
To stop recording:
Press the button.
The tape will stop. When the button is pressed again, the CD will
stop.
Recording from the radio
1
Tune in to the desired station (see page 14).
2
Load a cassette into the cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the button.
Recording will be paused.
4
Press the ( ) button.
To stop recording:
Press the button.
Notes:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
Whilst recording from the radio, the recording pause function
does not work.
Erasing a recorded tape
1. Load the tape to be erased into the cassette compartment with
the side to be erased facing toward you.
2. Press the FUNCTION button until "TAPE" appears on the dis-
play.
When operating with the remote control, press the TAPE button.
3. Press the button.
4. Press the ( ) button to start erasing.
Erase-prevention tabs of cassette tapes:
When recording on a cassette
tape, make sure that the erase-
prevention tabs are not re-
moved. Cassettes have remov-
able tabs that prevent
accidental recording or erasing.
Tab for side B Tab for side A
To protect the recorded sound,
remove the tab after recording.
Cover the tab hole with the ad-
hesive tape to record on the
tape without the tab.
02/10/1 XL_45H_H_E4.fm
XL-45H
ENGLISH
Side A
1
2
3
4
5
6
7
8
E-24