Infinity Primus PS-8 Owner's Manual page 5

S C
UBWOOFER ONNECTIONS
Choose the Subwoofer Connection That Is Most Suitable for Your Receiver/Processor
If you have a Dolby* Digital or DTS ®
quency-effects (LFE) or subwoofer output:
SUBWOOFER OR
LFE OUTPUT
OUT IN
+
If your receiver/processor does not have subwoofer outputs for
the left and right channels or an LFE output:
receiver/processor with a low-fre-
+
RECEIVER/AMPLIFIER
Front Speaker Output
OUT IN
+ +
H
R R
I
– –
G
H
L
+ +
E
V
L L
E
L
– –
OUT IN
If your receiver/processor does not contain a Dolby Digital or DTS
processor but has a subwoofer output:
OUT IN
+ +
NOTE: Some receivers have one subwoofer output.
In that case, it is recommended that you use a Y connector
(not included) to maximize performance.
BLACK =
1. LOOSEN TERMINALS
2. INSERT BARE END;
TIGHTEN TERMINALS
NO STRIPE =
This figure shows how to connect bare wires
to the terminals.
RECEIVER/PROCESSOR
L R
+
RED =
–
– +
STRIPE =
PRIMUS PS-8 5