Chicago Welding 98871 Set Up And Operating Instructions Manual page 10

Wire Spool (27) Installation
1. turn the welder OFF and unplug it
before proceeding.
2. Press in the Cover Latch (8) on the front
of the handle, then open the Cover (31).
3. Remove the Wing Nut (25) and the Spool
Retaining Nut (26). If replacing a Spool,
remove the old Spool and all remaining
wire from the liners.
4. Make sure the Spool Spring (24) is in
place on the Spool Spindle (28).
Place the new flux core Wire Spool over
the Spool Spindle (28) and on top of the
Spool Spring (24) as illustrated.
to prevent wire feed problems,
set the Spool so that it will unwind
counterclockwise.
5. Secure Spool in place with the Spool
Retaining Nut (26), then the Wing Nut
(25).
Page 10 For technical questions, please call 1-800-444-3353.
gun
5
4 6
MIn On
7
3
8
2
9
1
MAX
OFF
0
10
WIRE-FEEd SPEEd
90 AMP FLUX WIRE WELdER
120 V~
60 hz
cover (31)
cover
Latch (8)
wire must
unwind this
direction
Wire
Spool
(27)
Wing nut (25)
Spool Retaining nut (26)
Wire Spool (27)
Spool Spring (24)
Spool Spindle (28)
SKU 98871