c.
If the temperature in the auger rises beyond a certain acceptable level, two high temperature switches located under and above auger housing
will stop the fuel feed system and a warning
CODE
BEFORE RESETING
H1, H2, H3
Heat exchanger and/or exhaust system
OR H4
is/are clogged. Refer to the owner's manual
for maintenance procedures.
*** After 3 attempts, reset is no longer possible, call SBI technical support.
DAMPER OPERATION
will appear.
TO RESET
Press simultaneously for 2 seconds
POÊLE / STOVE
Figure 14
Damper operation
15
.
and