Table of Contents
Advertisement
Super Freeze and low ambient switch
a) Super freezing : If ambient temparature is more than 18 °C , This switch can be used
as superfreeze switch.
For freezing the fresh food or when the RED lamp is light. The appliance will work
longer. So after you get the cold condition (or the Red lamp is off) you must position
to previous position.
b) Low ambient performance: If ambient temparature is less than 18°C , This switch
can be used for good low ambient performence.
At the ambient temperature is more than 18° C , If superfreezing function doesn't
want to be used , it must be set off position.
Please not that:
a) For energy saving do not switch on "I" position, If you do not need.
b) If red lamp continuously light for more than 48 hours, Please close switch and call
service.
Turning On The Appliance
Once the appliance has been connected to the power supply make sure that the green lamp
is on. Then turn the refrigerator thermostat dial and the freezer thermostat dial to positions
between 2-4. (Note that; for best internal temperature the indicator in the refrigerator and
freezer thermostat should be positioned between 2 and 4.)
• When you first switch on the appliance, for starting a suitable cooling, the appliance
should work 24 hours continuously until it cools down to sufficient temperature.
• During this time do not open the door frequently and do not place a lot of food inside
the appliance.
• If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting
or re-plugging the unit in order not to damage the compressor.
Low ambient
temperature control switch
EN - 19 -
(In some models)
0 : OFF position.
I : ON position.
Advertisement
Table of Contents
