Table of Contents
Advertisement
Use clamps (not included) or other practical ways to secure and support the
15.
workpiece to a stable platform. Holding the work by hand or against your body is
unstable and may lead to loss of control.
Do not force the tool. Use the correct tool for your application. The correct tool
16.
will do the job better and safer at the rate for which it is designed.
17.
Do not use the power tool if the Power Switch does not turn it on or off. Any tool
that cannot be controlled with the Power Switch is dangerous and must be replaced.
Unless explicitly instructed otherwise, disconnect the Power Cord Plug from
18.
the power source before making any adjustments, changing accessories, or
storing the tool. Such preventive safety measures reduce the risk of starting the tool
accidentally.
Store idle tools out of reach of children and other untrained persons. Tools are
19.
dangerous in the hands of untrained users.
20.
Maintain tools with care. Keep tools in good repair. Properly maintained tools will
get the job done better. Do not use a damaged tool. Tag damaged tools "Do not use"
until repaired.
21.
Check for breakage of parts, and any other condition that may affect the tool's
operation. If damaged, have the tool serviced before using. Many accidents are
caused by poorly maintained tools.
Use only accessories that are recommended by the manufacturer for your model.
22.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
Tool service must be performed only by qualified repair personnel. Service or
23.
maintenance performed by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow instructions
24.
in the "Inspection, Maintenance, And Cleaning" section of this manual. Use of
unauthorized parts or failure to follow maintenance instructions may create a risk of
electric shock or injury.
Maintain labels and nameplates on the Welder. These carry important information.
1.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
Maintain a safe working environment. Keep the work area well lit. Make sure there
2.
is adequate surrounding workspace. Always keep the work area free of obstructions,
grease, oil, trash, and other debris. Do not use a power tool in areas near flammable
chemicals, dusts, and vapors. Do not use this product in a damp or wet location.
Avoid unintentional starting. Make sure you are prepared to begin work before
3.
turning on the Welder.
For technical questions, please call 1-800-444-3353;
SKU 55167
Service
SPECIFIC SAFETY RULES
Troubleshooting section at end of manual.
Page 5
Advertisement
Table of Contents
