Page 1
Congratulations By purchasing a Gigaset, you have chosen a brand that is fully committed to sustainability. This product’s packaging is eco-friendly! To learn more, visit www.gigaset.com.
Page 3
Enjoy full freedom of movement while phoning Attach the Gigaset L410 to your clothing and move around as you wish while phoning. You can then be reached anywhere at home or in the office and keep your hands free while phoning –...
Page 4
Overview Loudspeaker Volume keys £ Setting the volume of the page 11 loudspeaker and the ringtone. Answer/End call key £ Press briefly: Accept call, page 7 take over call , end call £ Hold down: Join in on a call page 9 £...
Safety precautions Warning Read the safety precautions and the user guide before use. Explain their content and the potential hazards associated with using the telephone to your children. Use only rechargeable batteries that correspond to the specification provided on page 15, as this could otherwise result in significant health risks and personal injury.
Gigaset L410 is a handsfree clip for cordless telephones. You attach it to your clothing in order to enjoy complete freedom of movement while on the telephone. The Gigaset L410 is registered to a Gigaset base or a DECT base from another manufacturer. Depending on your base, you can register multiple Gigaset L410 and use them to make internal, external or conference calls.
Page 7
Note The Gigaset L410 uses 0000 as its PIN for registration. When you have set another PIN on your base, you must reset this to 0000 to enable registration of the L410. After registration you can change the PIN again.
¤ Check whether the registration PIN on the base is set to 0000. ¤ Move closer to the base with the Gigaset L410. £ If the device is already registered to another base, you must de-register it page 10). Following this, it will be ready for registration again.
Page 9
Phoning With your Gigaset L410 you can accept calls, take over calls or join in on a call. You can call the Gigaset L410 internally from a handset, call back internally, or connect a call. Accepting a call An incoming call is indicated by a ringtone and an LED ¤...
Page 10
Transferring a call from the Gigaset L410 You are making a call using the Gigaset L410 and wish to continue the call on the handset. ¤ Line in use §§Yes§§ Press the display key on the handset. Transfer call from L410 §No§...
Acoustic feedback (whistling noise) may occur when you are phoning in the same room with a Gigaset L410 and a handset in handsfree mode. In this case, end the handsfree mode on the handset or increase the distance between the devices.
Press the Answer/End call key for at least 3 seconds until you hear the shut-down melody. Searching for the device ¤ Select the Gigaset L410 from the list of registered handsets and call it internally ¤ Use your base’s paging function. Deregistering the device from the base ¤...
Page 13
Changing ringtone and loudspeaker volume There are two ringtones, one for external and one for internal calls. 5 volume levels are available for the ringtones and loudspeaker. When you reach the highest or lowest volume level you will hear a signal tone. Setting the ringtone volume: Ringtone quieter Press briefly...
Service (Customer Care) You have questions? As a Gigaset customer, you can take advantage of our comprehensive service offerings. You can find help quickly in this User Manual and in the service pages of our Gigaset online portal. Please register your phone right after purchase. This enables us to provide you with even better service regarding questions or a warranty claim.
It is only possible to reduce radiation when your Gigaset base also supports this function. The radiation from the Gigaset L410 is automatically reduced, depending on the distance from the base. In addition, the Gigaset L410 supports the Eco Mode/Eco Mode+ functions on Gigaset bases. For more information, please read the instructions...
Disposal atteries should not be disposed of in general household waste.Entsorgen sie diese in den beim Fachhandel aufgestellten grünen Boxen des „Gemeinsame Rücknahmesystem Batterien“. Observe the local waste disposal regulations, details of which can be obtained from your local authority. All electrical and electronic equipment must be disposed of separately from general household waste using the sites designated by local authorities.
General specifications DECT-Standard Is supported GAP-Standard Is supported Radio frequency range 1880–1900 MHz Transmission power 10 mW, average power per channel 250 mW, pulse power Repetition frequency of the 100 Hz transmission pulse Duration of the transmission pulse 370 μs Environmental conditions for +5°C to +45°C, 20% to 75% relative humidity operation...
ISDN and S810/ S810A, telephones/GAP IP-telephones Function SL400/SL400A * telephones from other manufacturers Accept call on Gigaset L410 Transfer call to Gigaset L410 One-click switch between handset and Gigaset L410 Join conference call/take over yes** yes** call Include Gigaset L410 in a conference call * see also www.gigaset.com/compatibility...
Guarantee Certificate - United Kingdom Without prejudice to any claim the user (customer) may have in relation to the dealer or retailer, the customer shall be granted a manufacturer's Guarantee under the conditions set out below: u In the case of new devices and their components exhibiting defects resulting from manufacturing and/or material faults within 24 months of purchase, Gigaset Com- munications shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device.
Guarantee Certificate - Ireland Without prejudice to any claim the user (customer) may have in relation to the dealer or retailer, the customer shall be granted a manufacturer’s Guarantee under the conditions set out below: u In the case of new devices and their components exhibiting defects resulting from manufacturing and/or material faults within 24 months of purchase, Gigaset Com- munications shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device.