Registering The Handset - Gigaset A510H User Manual

Registering the handset

Before you can use the phone, you must first register the handset to the base.
The registration procedure will depend on the type of base.
Automatically registering the A510H handset to the Gigaset A510/
A510A base
Prerequisite: The handset must not already be registered to a base.
¥
Place handset
Redial
Please note
u Each key press interrupts automatic registration.
u If the handset is already registered to a base or if automatic registration does
not work, the handset will have to be registered manually.
Manually registering the A510H handset
You must manually register the handset on both the handset (1) and the base (2).
1) On the handset
¤ Settings ¤ Registration ¤ Register Handset
§Menu§
~
§OK§
The display shows Handset is registering.
2) On the base
¤ Within 60 seconds, press and hold the registration/paging key on the base
(approx. 3 seconds).
U
into base
Time
ì
Handset is
registering
If required, enter the system PIN for the base (the default is 0000).
Press the display key.
¤ Place the handset with the display
facing up in the base.
The handset registers automatically.
Registration can take up to 5 minutes.
Do not remove the handset from the
base during this time.
First steps
13