Calling; Dialling With Number Keys; End Call; Set Volume - Siemens SL55 User Manual

20
Dialling with number
keys
The phone must be switched on
(standby mode) and the keypad
must be open.
Enter number (always
J
with area code, if neces-
sary with international
dialling code).
§Clear§
the last digit, a long press
clears the entire phone
number.
Press the Call key. The dis-
A
played phone number is
dialled.

End call

Press End key briefly. The
B
call is ended. Press this
key even if the person on
the other end of the line
has hung up first.
Close keypad.
Or

Set volume

Using the plus/minus side key (press
top/bottom), adjust the volume (on-
ly possible during a call).
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.
A short press clears

Calling

Redial previous numbers

To redial the phone number last
called:
A
To redial other numbers that were
dialled previously:
A
G
A
Additional information
Save phone number in Address-
book/Phonebook .....................p. 31, p. 34
§Options§
................................................p. 22
§Hold
y menu§
§Divert§
§Handsfr.§
Microphone on/off .............................p. 24
Voice dialling .....................................p. 37
Auto key lock .....................................p. 72
Phone number transmission off/on
(Hide ID)............................................p. 73
International dialling codes..............p. 113
Phone number memo......................p. 115
Control codes (DTMF).....................p. 111
Press Call key twice.
Press the Call key once.
Pick out the required
phone number from the
list, then press ...
... to dial.
Call lists............................p. 39
Call menu.........................p. 24
Set divert .............................p. 73
Handsfree .......................p. 22