Reset Menu; Network Set Up Sub-Menu - Bunker Hill Security 67139 Set Up And Operating Instructions Manual

reset menu

To reset the menu to the factory set-
tings:
1. In the Main Menu, press the arrow
keys [ , ] to select "Reset Menu".
2. Press [SEL] to reset the menu.
3. You will be prompted to enter the cur-
rent password.

netwOrk set up sub-menu

The Network Set up sub-menu allows
you to customize the DVR to your
network settings.
1. In the Main Menu, press the up or
down arrow keys [ ,
"Network Setup".
2. Press [SEL] to enter the Network
Setup sub-menu.
SKU 67139
] to select
For technical questions, please call 1-800-444-3353.
mac address
This indicates the DVR network port's
physical address.
impOrtant: The MAC (Media Access
Control) address is your computer's
unique hardware identity code. This
setting should only be changed if
multiple DVRs are being setup on the
same network. The first part of the
code must not be changed from it's
setting of "00".
note: For new network settings to take af-
fect, the DVR must be restarted after
making any changes.
ip allOcatiOn
The DVR supports DHCP and Static
IP modes.
rev 10g
Page 27