Page 1
INSTRUCTION MANUAL Cordless Driver Drill BDF441 BDF451 006716 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Model; BDF441,BDF451 The tool is intended for drilling and screw driving in wood, We declare under our sole responsibility that this metal and plastic. product is in compliance with the following standards of For Model BDF441 standardized documents; ENG103-1 Noise EN60745,...
GEA002-3 reduce personal injuries. Avoid accidental starting. Ensure the switch is GENERAL SAFETY RULES in the off-position before plugging in. Carrying WARNING! Read all instructions. Failure to follow all power tools with your finger on the switch or instructions listed below may result in electric shock, fire plugging in power tools that have the switch on and/or serious injury.
of power tool, taking into account the working Be sure no one is below when using the tool in conditions and the work to be performed. Use high locations. of the power tool for operations different from Hold the tool firmly. those intended could result in a hazardous Keep hands away from rotating parts.
Do not incinerate the battery cartridge even if is not being inserted correctly. it is severely damaged or is completely worn Switch action out. The battery cartridge can explode in a fire. 1. Switch trigger Be careful not to drop or strike battery. SAVE THESE INSTRUCTIONS.
Reversing switch action CAUTION: Always set the speed change lever fully to the 1. Reversing • correct position. If you operate the tool with the switch lever speed change lever positioned halfway between the "1" position, "2" position and "3" position, the tool may be damaged.
First, slide the action mode change lever to the position Installing bit holder symbol. 1. Bit holder The fastening torque is minimum when the number 1 is 2. Bit aligned with the pointer, and maximum when the marking is aligned with the pointer. The clutch will slip at various torque levels when set at the number 1 to 16.
Always secure small workpieces in a vise or similar • NOTE: hold-down device. Make sure that the driver bit is inserted straight in • If the tool is operated continuously until the battery • the screw head, or the screw and/or bit may be cartridge has discharged, allow the tool to rest for damaged.
Page 9
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Drill bits • Screw bits • Hook •...
Page 12
Makita Corporation Anjo, Aichi, Japan 884639B221...