Table of Contents
Advertisement
Quick Links
Jackson Grills Premier Series Owner's Manual
This manual is for use with JPG700, JPG700BI-2 and
Certified for Canada and U.S.A
Warning:
Please read and understand the contents of this manual fully before operating. Failure to
do so may result in fire or explosion. Homeowners should retain these instructions.
All barbecues and carts are designed for OUTDOOR use only and cannot be installed in or on boats.
This barbecue CANNOT be installed in or on Recreational Vehicles. Not for commercial use.
JACKSON GRILLS INC.
#106-2480 Mt. Lehman Rd.
Abbotsford, BC
V4X 2N3
TELEPHONE: (604) 855-6756
FAX:
(604) 855-5373
SUPPORT: support@jacksongrills.com
WEB SITE: www.jacksongrills.com
JPG850BI-2 series grills
Advertisement
Table of Contents
Related Manuals for Jackson Grills Premier JPG700 series
Summary of Contents for Jackson Grills Premier JPG700 series
- Page 1 Jackson Grills Premier Series Owner’s Manual This manual is for use with JPG700, JPG700BI-2 and JPG850BI-2 series grills Certified for Canada and U.S.A Warning: Please read and understand the contents of this manual fully before operating. Failure to do so may result in fire or explosion. Homeowners should retain these instructions.
-
Page 2: Table Of Contents
TABLE OF CONTENTS: SAFETY LP GAS CYLINDER REPLACEMENT OPD EQUIPPED CYLINDER HOSE AND REGULATOR LEAK TESTING INSTALLATION CLEARANCES ASSEMBLY 10-13 GETTING TO KNOW YOUR GRILL LIGHTING INSTRUCTIONS GAS CONVERSION 16-18 MAINTENANCE GRILLING TIPS AND TECHNIQUES TROUBLE SHOOTING PARTS LIST EXPLODED VIEWS WARRANTY WARRANTY REGISTRATION DO’S AND DON’TS... -
Page 3: Safety
SAFETY: Your new Jackson Grill barbeque is a safe, convenient appliance when used and maintained properly. As with all gas-fired appliances, certain safety precautions must be observed. Failure to follow these precautions may result in damage or injury. If you have any questions or concerns regarding the assembly or operation of this appliance, you should contact your dealer, gas appliance technician or your gas company. -
Page 4: Lp Gas Cylinder
LP GAS CYLINDER PLACEMENT: Cylinders must be installed according to assembly instructions. Install the gas cylinder into the tank hole inside of the Jackson Pedestal. LP GAS CYLINDER: QCC-1 Quick Closing Coupling Your grill is designed to be used with an LP gas cylinder equipped with the new QCC-1 Quick Closing Coupling system. - Page 5 HANDLING: 1. Government regulations prohibit shipping full LP gas cylinders. You must take your new cylinder to an LP gas dealer for filling. 2. A filled LP gas cylinder is under very high pressure. Always handle with care and transport in the upright position.
-
Page 6: Opd Equipped Cylinder
OPD EQUIPPED CYLINDER: Effective January 1, 1998, the standard for outdoor gas appliances, ANSI Z21.58/CAN CGA-1.6, requires that appliances are to be used with cylinders equipped with an Overfill Prevention Device (OPD). The OPD is designed to reduce the potential for the overfilling of propane cylinders, thus reducing the possibility of relief valve discharges of raw propane. -
Page 7: Leak Testing
4. Leak test the connection. See “leak test”. 5. Refer to lighting instructions. To avoid activating the Flow Limiting Device when lighting, open the cylinder valve slowly with the appliance valves off. If the Flow Limiting Device is accidentally activated, turn off cylinder valve and appliance valves, wait 10 seconds to allow the device to reset, open cylinder valve slowly, then open the appliance valve. -
Page 8: Installation
INSTALLATION: In Canada, this appliance must be installed in accordance with the local code and relevant CGA standards: CAN/CGA-B149.1 LP Gas/Propane Installation Code and latest codes where applicable. In the USA, this appliance must be installed in accordance with the local code and relevant national code: ANSI Z223.1 –... -
Page 9: Clearances
If these units are to be installed into a COMBUSTIBLE island a Zero Clearance Box MUST be installed. These zero clearance boxes are only available through your local dealer or Jackson Grills Inc. Use part numbers: #ZCAN700 / #ZCAN850 for installations into combustible Islands. -
Page 10: Assembly
ASSEMBLY: Please ensure the proper tools are used for ease of installation. Some assembly will be required if this unit is installed in a pedestal. Please remove all components from the packaging and inspect all components to ensure there is no damage to any components in the packaging. - Page 11 After the side shelves have been installed, ensure the grill head is pushed back in the pedestal as far as possible. With the screws removed from the securing straps, place a screw through the side of the condiment bins and secure the condiment bins to the display panel.
- Page 12 ROTISSERIE KIT COMPLETED INSTALLATION Rotisserie rod bushing placed on the cut out provided on the inner hood UPPER FLAVOR SHIELD, COOKING GRID INSTALLATION Remove the upper flavor shields from the packaging. Please ensure that all protective plastic has been removed from these parts. These upper flavor shields should be placed on the pins provided on the firebox front and rear.
-
Page 13: Assembly
MAIN GAS LINE CONNECTIONS FOR PROPANE GAS AND NATURAL GAS The main fuel supply gas line is connected to a manifold tee securely mounted inside the pedestal located on the left hand side of the pedestal. Remove the propane hose and regulator assembly from the packaging. Please ensure that there is no debris inside the brass flare connection or inside the rubber hose. -
Page 14: Getting To Know Your Grill
GETTING TO KNOW YOUR GRILL Outer Hood Handle Pull Out Grease Tray Hood Thermometer Main Control Knobs / Display Panel Outer Hood Electronic Ignition Cooking Grids X 2 Side Burner Side Shelf Side Shelf Warming Rack Condiment Bins X 2 Infrared Rear Burner Pedestal 2 x Drawer Slide Out... -
Page 15: Lighting Instructions
MAIN BURNER LIGHTING BEFORE LIGHTING: Carefully inspect the gas supply hose before turning the gas “ON”. If there is evidence of cuts, wear, or abrasion, it must be replaced before use, the replacement hose assembly shall be that specified by the manufacturer. -
Page 16: Gas Conversion
CONVERTING FROM PROPANE GAS(LP) TO NATURAL GAS A qualified gas installer should perform all gas conversion. This appliance should only be converted with conversion kit JPG700/850–NGKIT. This conversion kit is supplied with this grill. MAIN BURNER ORIFICES Remove the cooking grids and upper flavor shields. - Page 17 REAR BURNER. Using a # 2 Phillips screwdriver undo the 4 screws that hold the back cover plate to the inner hood. Once the cover has been removed use a 7 mm wrench to remove the rear burner orifice from the rear burner.
-
Page 18: Gas Conversion
SIDE BURNER Open the side burner lid and Open the side burner lid and remove the grate over remove the the burner head. grate above the Undo the 2 Phillips head screws that hold the flame burner head. thrower (burner ignition) and VERY carefully move away from the burner head. -
Page 19: Maintenance
GAS LINE Remove the 3/8” flare fitting that attaches the propane hose from the manifold block inside of the pedestal and replace with an approved 10’ natural gas hose neoprene hose. Part # NGHOSE REMEMBER TO LEAK CHECK Remove ALL FITTINGS AND ORIFICES propane hose AFTER and regulator... -
Page 20: Rotisserie Cooking
FOOD SAFETY TIPS AND TECHNIQUES We want to enjoy healthy and safe grill cooking, so here are some tips for basic barbecue hygiene: Bacteria are living organisms that grow and multiply rapidly in warm moist foods. Marinate meat in the refrigerator and take it out one half hour before grilling, if you want to grill your prepared meat at room temperature. -
Page 21: Trouble Shooting
TROUBLE SHOOTING PROBLEM POSSIBLE CAUSES SOLUTION For propane – improper lighting Low heat or low flame when Ensure lighting procedure valve turned to high. procedure. followed carefully. All gas grill valves must be in the off position when the tank valve is turned on. Turn tank on for all pressure to equalize. -
Page 22: Parts List
PARTS LIST Part Number Part Description Quantity 1 07-400 Outer Hood 32 07-432 Pedestal Side Right 2 04-3403 Warming Rack Bracket 33 07-433 Pedestal Side Left 3 07-402 Hood Handle 34 07-416 Pedestal Back 4 07-4505 Thermometer 35 07-417 Pedestal Heat Shield 5 07-403 Inner Hood 36 07-418... -
Page 23: Exploded Views
EXPLODED VIEW... -
Page 24: Warranty
Jackson Grills Inc. or its parties will not be responsible for the installation, labor or any other costs or expenses related to the re installation of the warranted part, and such expenses are not covered by this warranty. - Page 25 NOTE: It is normal for stainless steel surfaces to discolor due to high heat given off from the barbeque burners. Please take the time to fill out and return the Ownership and Registration Card below. It can be mailed to: Jackson Grills Inc. #106-2480 Mt. Lehman Rd. Abbotsford, BC...