Special Vcr Features - Panasonic PV-D4762 Operating Instructions Manual

Special VCR Features (continued)
Remote Warning Feature
If Multi-brand feature is used (p. 28), and this feature is
set to on, a warning appears whenever an invalid key
is pressed in TV, DSS or CABLE mode.
1 Press ACTION*
to display MENU.
2
Press
MENU
SET UP VCR
to select "SET UP VCR,"
SET CLOCK
SET UP CHANNEL
SET UP COMMERC I AL ADV. and
IDIOMA/LANGUE : ENGL I SH
VCR'S OUTPUT CH:3
press SET.
SELECT : SET:SET
EXIT : ACTION
3 Press
SET UP VCR
to select
REPEAT PLAY : OFF
REMOTE WARN I NG : ON
"REMOTE WARNING," and
AUTO SHUT-OFF : OFF
press SET
SELECT : SET: SET
to set "ON" or "OFF."
EXIT : ACT I ON
• If "OFF," remote warning will not appear
when invalid key is pressed.
4
Press ACTION twice
to return to normal screen.
Tape Position and Tape Status Feature
To find out the present tape position and amount of tape remaining.
Tape position is displayed for VHS-C type Cassettes, tapes
under 30 minute long, and some other tapes, but the
position is not correct.
1 Press TAPE POSITION
to detect current tape position.
• "DETECTING TAPE POSITION" is displayed
DETECTING TAPE POSITION
only when a cassette is first inserted, and it
takes several seconds for correct tape
position to appear.
• The present tape position indication and
amount of tape remaining (according to
SP
tape speed) is displayed.
• Tape remaining time display may not be
R 120 M I N.
precise.
BEG I N END
2
Press TAPE POSITION
to return to normal screen.
Note
This function cannot display exact amount of tape remaining for
tapes 30 minutes or less, or for tapes over 120 minutes in length.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
38
PV-D4762 P26-39 (2nd) [LSQT0525B].p65
*Important: If a remote control button does not work
38
when pressed, press the VCR button
on the remote and try the button again.
INPUT
STOP
PAUSE/
STILL
ACTION
SELECT
SET
TAPE
POSITION
REC
2002/05/23, 18:21