Nokia SU-8W User Manual page 12

4. When the installation application asks where to install the Wireless Keyboard
application, select the phone memory or memory card.
If you use several memory cards with your phone, select the phone memory.
For details, see the user guide of your compatible phone.
5. Enter the Bluetooth menu of your phone, and make sure that the Bluetooth
feature is activated.
6. Switch on the keyboard.
7. Start the Wireless Keyboard application, press Options, and select
keyboards to set the phone to search for Bluetooth devices.
8. Select the keyboard from the list.
9. To pair the keyboard with your phone, enter a Bluetooth passcode of your
choice (1 to 9 digits) on the phone, enter the same passcode on your keyboard
within 30 seconds, and press the Enter key on the keyboard. You do not need to
write down the passcode because you can use a different passcode if you need
to pair the keyboard with your phone again.
Note that to enter the digits of the Bluetooth passcode, you do not need to
press the Fn key first.
10.If you are asked for a keyboard layout, select it from a list on your phone.
11.Wait until the name of the keyboard (SU-8W) is shown, its status changes to
Connected, and the green
If this is the case, the keyboard is connected to your phone and is ready for use.
For details, see Using the keyboard
indicator of your keyboard blinks slowly.
on page 15.
©
Copyright 2004 Nokia. All rights reserved.
Find
12