Yamaha RY8 Owner's Manual page 57

RECORDING CHORD CHANGES
To record chord changes in the chord track at specific clock locations in the
song, first you must access the Chord Assign feature.
ACCESSING CHORD ASSIGN
[CHORD]. The words "BEAT" and "CLOCK"—which display the current
beat and clock location of the currently selected measure—will appear in
the lower left area of the LCD, and a small inverted triangle will appear
over the Chord Root in the upper left area of the LCD. (You can press [2]
and [1] to position the flashing cursor over the Chord Root, Chord Type or
beat/clock position.)
SPECIFYING A CLOCK
to select a measure. If you want to enter the chord change at a clock
position other than at the top of each measure, press [-1] and [+1] to
specify a particular clock in the measure. You can select the precise
clock position in a measure to change the chord by pressing [1] twice to
position the flashing cursor over the beat/clock.
- From within Step Record Mode, press
- After pressing [CHORD], press [BWD] and [FWD]
49