Advertisement
• Dynamo: mounting bracket (4),
lever (5), friction roller (6), latch for
electric wire (7), adjustment bolt
for dynamo position (8)
General safety instructions
Obey all local laws. Always keep your
hands free to operate the bicycle
while cycling. Your first consideration
while cycling should be road safety.
Only operate the product if it is safe to
do so under all cycling conditions.
When you install the product, make
sure it does not interfere with or
hinder the steering or braking systems
of the bicycle.
Make sure the product is not installed
where you might come in contact
with it in the event of an accident
or collision.
During extended operation or in high
temperatures, the charger or dynamo
• Other parts: Nokia Bicycle Holder
CR-124 (9), grounding wire (10),
electric wire (11)
may be very warm. Do not touch the
dynamo for a few minutes after
a long ride.
Incorrect installation may cause the
dynamo to fall between the bicycle
spokes and jam the wheel. After riding
a few kilometres, make sure that the
dynamo is still securely fitted. After
that, check every time before using
the bicycle.
Incorrect installation of the dynamo
causes an increase in running
resistance and an excessive wearing
of tyres during operation.
ENGLISH
Advertisement
