addresses, contact your internet service
provider.
Proxy server address
●
the proxy server.
Proxy port number
●
of the proxy server.
WLAN internet access points
Press
, and select
Connection
Destinations
>
point, and follow the instructions on the screen. Or,
open one of the access point groups, select an
access point marked with
Follow the instructions from your WLAN service
provider.
WLAN network name
●
manually
or
Search for
an existing network,
WLAN security mode
settings of its access point device.
Network status
●
name is displayed.
WLAN network mode
●
create an ad hoc network and to allow devices to
send and receive data directly; a WLAN access
point device is not needed. In an ad hoc network,
all devices must use the same
name.
172
— Enter the address of
— Enter the port number
Tools
Settings
>
>
New access
>
, and select Edit.
— Select
Enter
networks. If you select
WLAN network mode
are determined by the
— Define whether the network
— Select
Ad-hoc
to
WLAN network
WLAN security mode
●
used: WEP,
802.1x
WPA/WPA2. If you select
encryption is used. The WEP, 802.1x, and WPA
functions can be used only if the network
supports them.
To enter the settings for the selected security mode,
select
WLAN security
Security settings for WEP
WEP key in use
●
privacy (WEP) key number. You can create up to
four WEP keys. The same settings must be
entered on the WLAN access point device.
Authentication type
●
Shared
for the authentication type between
your device and the WLAN access point device.
WEP key settings
●
and
(length of the key),
Hexadecimal), and
in the selected format).
Security settings for 802.1x and WPA/WPA2
WPA/WPA2
— Select the means of
●
authentication:
authentication protocol (EAP) plug-in, or
shared key
to use a password. Complete the
appropriate settings:
EAP plug-in settings
●
your service provider instructs.
— Select the encryption
(not for ad hoc networks), or
Open
network, no
settings.
— Select the wired equivalent
— Select
Open
or
— Enter
WEP encryption
WEP key format (ASCII
WEP key
(the WEP key data
EAP
to use an extensible
— Enter the settings as
or
Pre-