Advertisement
General
▲
▼
[VOLUME
] [VOLUME
]
adjusts the volume.
BAND
CQ-C1021N
PTY
APM
SEL
SEL
SEL
PWR
CT
AF
MUTE/SQ
RANDOM
SCAN
REPEAT
TA
SRC
SRC
DISP
1
2
3
4
5
6
[SRC] (Source)
[MUTE]
toggles mute on/off.
selects a source.
(SQ) (Sound Quality)
(PWR) (Power)
selects a sound type (SQ). (Hold it down for
toggles power on/off.
more than 1 second.)
Power On/Off
SQ (Sound Quality)
Set your car's ignition switch to the ACC or ON position.
SQ is a function that can call up various sound types at
the touch of button in accordance with your listening
Power on: Press [SRC] (PWR).
music type.
Power off: Hold down [SRC] (PWR) for
Hold down [SQ] for more than 1 second to select the
more than 1 second.
sound type as follows:
(FLAT) flat frequency response:
Source Selection
does not emphasize any part. (Default)
Press [SRC] to change the source.
(ROCK) speedy and heavy sound:
Radio
Disc Player
exaggerates bass and treble.
(POP) wide-ranged and deep sound:
Volume Adjustment
slightly emphasizes bass and treble.
(Setting Range: 0 to 40, Default: 18)
▲
▼
Press [VOLUME
] or [VOLUME
].
(VOCAL) clear sound:
emphasizes middle tone and slightly empha-
sizes treble.
Mute
ON: Press [MUTE].
(
lights.)
Note: Settings of SQ, bass and treble are influenced
one another. If such an influence causes distortion to
the audio signal, readjust bass/treble or volume.
lights when mute is on
OFF: Press [MUTE] again.
Disc Player
printed side
Disc slot
[TRACK s] [TRACK d]
takes a disc in with the printed side facing up.
skip to the previous/next track in the disc
Note: The power will be turned on automatically
player source.
when a disc is loaded.
Hold down either of them for fast reverse/fast
forward.
[u] (Eject)
ejects the disc.
(y / 5) (Pause/Play)
BAND
BAND
CQ-C1021N
PTY
toggles pause/play in the play-
APM
SEL
SEL
SEL
er source.
PWR
CT
AF
[DISP] (Display)
SRC
SRC
MUTE/SQ
RANDOM
SCAN
REPEAT
TA
DISP
DISP
1
2
3
4
4
5
5
6
6
switches the information on
the display.
[SRC] (Source)
indicator
selects a source.
(RANDOM)/(SCAN)/(REPEAT)
toggles on/off each play mode.
¡
This unit does not support CD text display.
Caution
Do not insert foreign objects into the disc slot.
¡
¡
Do not insert a disc when the
indicator lights.
¡
Refer to the section of "Notes on Discs".
¡
This unit does not support 8 cm discs.
¡
If you insert an 8 cm disc and cannot eject it, turn ACC of your
car off once and turn it on again, then press [u] (Eject).
¡
This unit does not support MP3 and WMA disc play-
back.
1
Pause
Press [SRC] to select the disc player
source.
Press [BAND] (y / 5).
2
Select a desired portion.
Press again to cancel.
Track selection
Press [TRACK s] / [TRACK d].
Note: To perform fast forward/reverse, hold down
either of them.
Audio Settings
▲
▼
[
] or [
]
selects a value in the audio menu.
[SEL] (Select)
BAND
CQ-C1021N
PTY
selects items in the audio menu.
APM
SEL
SEL
SEL
SEL
PWR
MUTE/SQ
RANDOM
SCAN
REPEAT
TA
AF
SRC
DISP
DISP
1
2
3
4
5
6
[DISP] (Display)
exits from the audio menu.
1
Press [SEL] to display the audio menu display.
Note: If no operation takes place for more than 5 seconds in the audio menu (2 seconds in Main volume adjust-
ment), the display returns to the regular mode.
2
3
Press [ ▲ ] or [ ▼ ] to adjust.
Press [SEL] to select a mode to be
adjusted.
Volume
(Setting Range: 0 to 40, Default: 18)
[▲]: Up
[▼]: Down
Bass
(Setting Range: –12 dB to +12 dB by 2 dB,
[▲]: Increased
[▼]: Decreased
Default: 0 dB)
Treble
(Setting Range: –12 dB to +12 dB by 2 dB,
[▲]: Increased
[▼]: Decreased
Default: 0 dB)
Balance
(Setting Range: 15 levels each, Default: CNT (cen-
[▲]: Right enhanced
tre))
[▼]: Left enhanced
Fader
(Setting Range: 15 levels each, Default: CNT (cen-
[▲]: Front enhanced
tre))
[▼]: Rear enhanced
TA Volume Set
(Setting Range: 1 to 40, Default: 18)
[▲]: Increased
[▼]: Decreased
Note: If the fader is set to front, the pre-amp. output (rear) is decreased.
random indicator
Play time
Display change
Press [DISP] to change the display.
Player mode display (Default)
repeat indicator
Random play
Scan play
All the available tracks are played in a random sequence.
The first 10 seconds of each track is played in sequence.
Press [4] (RANDOM).
Press [5] (SCAN).
Press again to cancel.
Repeat play
(blinks during scanning)
Press again to cancel.
The current track is repeated.
Press [6] (REPEAT).
Press again to cancel.
Notes on CD/CD Media
Notes on CD-Rs/RWs
If you use commercial CDs, they must
¡
You may have trouble playing back some CD-R/RW discs
have the label shown at right.
recorded using CD recorders (CD-R/RW drives), either due
to their recording characteristics or dirt, fingerprints,
Some copy-protected music CDs are not
scratches, etc. on the disc surface.
playable.
How to hold a disc
¡
CD-R/RW discs are less resistant to high temperatures and
¡
Do not touch the underside of a disc.
high humidity than ordinary music CDs. Leaving them
¡
Do not scratch on a disc.
inside a car for extended periods may damage and make
¡
Do not bend a disc.
playback impossible.
¡
When not in use, keep a disc in a case.
¡
Some CD-R/RWs cannot be played back successfully due
Do not use irregularly shaped discs.
to incompatibility among writing software, a CD recorder
Do not leave discs in the following places:
(CD-R/RW drive) and the discs.
¡
Direct sunlight
¡
This player cannot play the CD-R/RW discs if the session is
¡
Near car heaters
not closed.
¡
Dirty, dusty and damp areas
¡
This player cannot play the CD-R/RW discs which contain
¡
Seats and dashboards
other than CD-DA data (MP3/WMA, Video CD, etc.).
Disc cleaning
¡
Be sure to observe the instructions of the CD-R/RW disc
Use a dry, soft cloth to wipe from the centre outward.
for handling it.
Do not attach any seals or labels to your discs.
Do not write on the disc label with a ballpoint pen
or other hard-point pens.
Radio (AM [LW/MW]/FM )
[BAND]
selects a band in the radio source.
(APM) (
Auto Preset Memory)
executes APM in the radio source. (Hold it
down for more than 2 seconds.)
CT
lights while mono/local is on.
BAND
BAND
APM
SEL
SEL
SEL
PWR
MUTE/SQ
SRC
SRC
RANDOM
1
1
2
2
3
3
4
4
[SRC] (Source)
Preset buttons [1] to [6]
selects a source.
selects a preset station in the radio source,
and presets the current station. (Hold it down
for more than 2 seconds.)
1
Press [SRC] to select the radio source.
2
Press [BAND] to select a band.
3
Select a station.
Frequency adjustment
[TUNE]]: Lower
[TUNE[]: Higher
Note: Hold down either of them for more than 0.5 sec-
onds and release it for seek tuning.
Preset station selection
Press the corresponding preset button from [1] to [6] to
tune in a preset station.
Radio Data System (RDS) in FM Broadcasting
Useful functions such as AF, TA, PTY, etc. are available in the RDS (Radio Data System)-ready areas.
Some FM stations are broadcasting added data compatible
with RDS. This radio set offers convenient functions using
such data.
RDS service availability varies with areas. Please understand if
RDS service is not available in your area, the following service
is not available, either.
The following functions are available when receiving RDS
stations.
Clock display
AF (Alternative Frequency)
The following functions are available when the AF mode is
active (
lights).
¡
When receiving conditions become bad, a station with bet-
ter receiving conditions is automatically tuned into.
¡
When executing APM, only RDS stations are selected.
When calling up a preset station, a best receiving station is
¡
selected automatically. (BSR Best Stations Research)
Notes:
¡
The AF sensitivity can be adjusted.
¡
The AF available range can be adjusted.
TA (Traffic Announcement)
The following functions are available when the TA mode is active
(
lights).
A TP station is automatically searched for and received at
¡
the instant of toggling the TA mode on if you are receiving
a non-TP station or TP station with poor reception.
¡
When executing station search or APM, only TP stations
are selected.
AF Level
Press [AF] to select AF level.
Low level AF operating sensitivity. (Default)
High level AF operating sensitivity.
When the AF network of an RDS station is not
required.
(MONO/LOC) (Mono/local)
lights while receiving an FM stereo signal.
selects MONO/LOCAL on/off in the FM mode
(Hold it down for more than 2 seconds.),
Band
Frequency Preset Number
and toggles LOCAL on/off in the AM
(LW/MW) mode.
CQ-C1021N
PTY
PTY
CT
TA
AF
SCAN
REPEAT
DISP
DISP
[DISP] (Display)
5
5
6
6
switches the information on
the display.
[TUNE ]] [TUNE []
down/up the frequency. (Hold it down for
more than 0.5 seconds and release it for seek
tuning.)
Up to 6 stations can be preset in AM (LW/MW), FM1, FM2,
and FM3 respectively.
Preset stations can be simply called up by pressing one of
Mono/Local selection
the buttons from [1] to [6].
Mono: Reduce noise if weak signals are received
Local: Only strong signals of stations are searched for in seek
Auto Preset Memory (APM)
tuning.
With this operation, stations with good receiving conditions
can be automatically stored in the preset memory.
FM broadcast
1
Select a band.
Hold down [PTY] (MONO/LOC) for more
2
Hold down [BAND] (APM) for more than 2
than 2 seconds to change the mode.
seconds.
(Default)
The preset stations under best receiving conditions are
MONO OFF/LOCAL OFF
MONO ON/LOCAL OFF
received for 5 seconds each after presetting the stations
(SCAN). To stop scanning, press one of the buttons
MONO OFF/LOCAL ON
MONO ON/LOCAL ON
from [1] to [6].
Note: New stations overwrite existing saved stations.
AM (LW/MW) broadcast
Press [PTY] (LOC) to change the mode.
LOCAL OFF
LOCAL ON
(Default)
TA ON/OFF
¡
Setting to TA on with the unit in another mode, it will auto-
matically switch to radio mode and output the traffic
Pressing [TA] toggles TA on and off.
announcement when the traffic announcement begins. The
traffic announcement having finished, the unit will return to
the previous mode. (TA Standby Mode)
PTY (Programme Type)
The following functions are available when the PTY mode is
active.
¡
The PTY of receiving station appears.
¡
Programmes can be searched for by PTY.
PTY ON/OFF
Note: PTY language can be selected.
Other functions of RDS
Pressing [PTY] toggles PTY mode on and
off.
CT (Clock Time)
The clock is automatically adjusted.
Programme Search by PTY
PS (Programme Service Name)
As well as the frequency, the name of the broadcast station
Programmes can be searched for by use of PTY that has
appears.
been originally preset.
EON (Enhanced Other Network)
Press [1] to [6] to select PTY in the PTY
RDS information is updated constantly in response to the
mode.
current position.
Programme Type Contents
EON-TA
1
NEWS
Traffic information from the current and other network
2
SPEECH
stations can be received.
Emergency Announcement Reception
Emergency announcement automatically appears on the
display when it is received.
3
SPORT
4
POP M
AF Range (Region)
5
CLASSICS
6
MUSIC
Holding down [AF] (REG: Region) for more
than 2 seconds toggles region mode on/off.
Another station in the same PTY is searched for by pressing
REG OFF:
[BAND].
The frequency is changed also for programmes
outside the region. (Default)
Notes:
REG ON:
When there is no corresponding programme type station,
¡
The frequency is changed only for programmes
"NONE" is displayed.
within the region.
¡
A desired PTY appears for 5 seconds.
PI Seek (Programme Identification Seek)
¡
Preset contents are changeable.
If reception becomes poor when tuning in a preset station,
press the same preset number button. The same station with
better reception will be searched for.
Press the same preset number button again to cancel.
Note: For PI Seek, cancel the TA mode first, then execute PI
Seek.
Display change
Press [DISP] to change the display.
AM (LW/MW) mode:
Band/frequency
CT Clock Time
FM (not RDS) mode:
Band/frequency
PS
CT
RDS mode:
PS Programme Service Name
Band/frequency
CT
Manual station preset
1
Tune into a station.
2
Hold down one of the preset buttons from
[1] to [6] for more than 2 seconds.
(blinks once)
Note: New stations overwrite existing saved stations.
Traffic Information Only (TA Mute)
For listening to only traffic information, activate TA and set
the volume to 0 in FM mode.
Once traffic information starts, the volume changes to the TA
volume.
(a
"Audio Settings")
Detailed PTY Selection
1
Press []] or [[] to select PTY.
SPEECH / MUSIC
/ NEWS
/ AFFAIRS /
INFO
/ SPORT
/ EDUCATE / DRAMA
/
CULTURE / SCIENCE / VARIED
/ POP_M
/
ROCK_M / EASY_M / LIGHT_M / CLASSICS /
OTHER_M / WEATHER / FINANCE / CHILDREN /
SOCIAL
/ RELIGION / PHONE_IN / TRAVEL
/
LEISURE / JAZZ
/ COUNTRY / NATION_M /
OLDIES
/ FOLK_M / DOCUMENT
2
Press [BAND].
NEWS
Search starts.
AFFAIRS, INFO, EDUCATE,
DRAMA, CULTURE, SCIENCE,
Notes:
VARIED, WEATHER, FINANCE,
¡
To stop searching, press [BAND] (SET).
CHILDREN, SOCIAL, RELIGION,
PHONE IN, TRAVEL, LEISURE,
¡
When there is no corresponding programme type station,
DOCUMENT
"NONE" is displayed.
SPORT
POP M
PTY Preset Change
CLASSICS
ROCK M, EASY M, LIGHT M,
Original PTY presets can be changed as you like.
OTHER M, JAZZ, COUNTRY,
1
Select a PTY that you would like to preset.
NATION M, OLDIES, FOLK M
2
Follow the procedure of ordinary preset-
ting. (
a
"Station Preset" in "Radio (AM
[LW/MW]/FM)")
PTY Language Selection
The language displayed on the screen is selectable. (English
or Swedish)
1
Hold down [SEL] for mote than 2 sec-
onds.
2
Press [ ▲ ] or [ ▼ ].
Advertisement
