Panasonic SC-PM33DB Operating Instructions Manual page 14

DAB (continued)
DAB operation DAB operation
1 Press [TUNER/BAND] to enter DAB mode.
The unit comes on.
Note
"Scan Failed."appears if no stations are memorized. If this occurs,
adjust the antenna and try Auto scaning.
2 Press [PLAY MODE] to select "STATION TUNE"
Each time you press the button:
"STATION TUNE"
3 Press [ /REW/4] or [ /FF/¢] to select a station.
The station name changes in alphanumeric order.
14
Numeric
buttons
CLEAR
"PRESET TUNE"
DAB Auto Scan DAB Auto Scan
Press and hold [PLAY MODE] until "DAB Auto Scan"
appears.
When a frequency is tuned by Auto scanning on this unit,
the ensemble corresponding to the frequency is displayed
for approximately 2 seconds.
Note
• When updating memory with Auto scan, preset stations are not
erased or changed
• When a frequency cannot be received, the previous memory is
restored.
• Total stations received is displayed for approximately 2 seconds.
Presetting Presetting
To Preset
Up to 20 channels can be set.
Press [ /REW/4] or [ /FF/¢] to select a station.
1
Press [PROGRAM].
2
Press the numeric buttons to select a channel.
3
Note
You cannot preset stations when the station is not broadcasting or
when you are selecting a secondary service.
Numeric
buttons
CLEAR