Cassette Tape - Panasonic SC-PM3 Operating Instructions Manual

Cd stereo system model no. sc-pm3
Table of Contents

Advertisement

Cassette tape

Basic play
Basic play
1
Press [0] and insert the cassette.
Forward side
2
Close the lid by hand.
Press [TAPE 3] to start play.
3
To play the other side of the cassette, turn the cassette
over.
To
Action
Press [ 7 ].
stop tape playback
Press [TAPE 3] when the unit is OFF with
start one-touch play
the cassette loaded.
fast-forward and
Press [ /REW/4] or [ /FF/¢] in the
rewind
stop mode.
Note
• Tapes exceeding 100 minutes are thin and can break or get caught
in the mechanism.
• Endless tapes can get caught up in the deck's moving parts if used
incorrectly.
TPS (Tape Program Sensor)
TPS (Tape Program Sensor)
This function enables you to search the beginning of a track,
up to a maximum of 9.
Press [ /REW/4] or [ /FF/¢] during play.
Play resumes from the track found.
Note
TPS may not function properly:
• with short silent parts
• when noise occurs between tunes
• if silent parts are found within tunes
Recording
Recording
Use normal position tapes.
High position and metal position tapes can be used, but this
unit will not be able to record or erase them correctly.
Preparation
Wind the leader tape so that recording can begin
immediately.
Top of unit
Disc lid
Recording the radio
Recording the radio
1
2
3
Recording discs
Recording discs
Insert inside the guides
1
2
3
4
5
Recording programmed tracks
Recording programmed tracks
1
2
3
Other basic operations
Other basic operations
To
erase a recorded
sound
stop recording
stop recording
temporarily
record on the other
side of the tape
Your attention is drawn to the fact that recording
pre-recorded tapes or discs or other published or broadcast
material may infringe copyright laws.
Erasure prevention
Erasure prevention
The illustration shows how to remove the tabs to prevent
recording. To record on the tape again, cover as shown.
Tab for side B
Insert the cassette to be recorded.
Tune to the required station (refer to page 10).
Press [¶ REC/8] to start recording.
Insert the cassette to be recorded.
Press [CD OPEN/CLOSE 0] to insert the disc and
close the lid.
Press [CD 3/8] and then [7, -DEMO].
Press [PLAY MODE] to select your desired mode
(refer to page 7).
Press [¶ REC/8] to start recording.
Insert the cassette to be recorded.
Program the tracks you want (refer to page 8).
Press [¶ REC/8] to start recording.
Action
1) Insert the cassette to be recorded.
2) Press [TAPE 3] and then [7, -DEMO].
3) Press [¶ REC
Press [ 7 ].
1) Press [¶ REC
2) Press again to resume recording.
Turn the cassette over and press
8].
/
[¶ REC
Side A
Tab for side A
8].
/
8].
/
To re-record
Normal tape
9
Adhesive tape

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents