Connect Your Radio To A Pc - Nokia THR880i User Manual

2. Install the necessary drivers on your PC. For instructions, see the user guide of
your PC operating system.
You must define the DTE (data terminal equipment) rate when you install the
drivers. The default DTE rate of your radio is 9600 b/s. For example, if you use
the Windows NT operating system, select a standard 9600 b/s modem.
3. Activate an access point, and change its settings in
Modem settings on page 106.

■ Connect your radio to a PC

You can connect your radio to a compatible PC using a DLR-3P cable.
1. Connect the DLR-3P cable to the serial port on your PC.
2. Connect the cable to your radio.
3. Start using the communication application on your PC. For instructions, refer
to the documentation of the application.
If you use a PC in a vehicle, you can connect your radio to the PC with the
CARK91B car kit and the DLR-3T cable. For details, contact your local dealer.
is displayed during a data connection. If there is an incoming or outgoing call,
data transfer is suspended, and
Making or answering phone calls during a PC connection is not recommended, as
it might disrupt the operation.
Copyright © 2005 Nokia. All rights reserved.
Modem
is displayed instead.
settings. See
124