Nokia X6-00 User Manual page 204

Hide thumbs Also See for X6-00:
Table of Contents

Advertisement

204 Settings
Call waiting — Set your device to notify you of incoming calls while you are in a
call (network service), or check whether the feature is activated.
Reject call with message — Send a text message when you reject a call, informing
the caller why you could not answer the call.
Message text — Write the standard text message that is sent when you reject a
call.
Own video in recvd. call — Allow or deny video sending during a video call from
your device.
Image in video call — If video is not sent during a video call, select the image to
be displayed instead.
Automatic redial — Set your device to make a maximum of 10 attempts to connect
the call after an unsuccessful call attempt. To stop automatic redialling, press the
end key.
Show call duration — Display the length of a call during a call.
Summary after call — Display the length of a call after a call ends.
Speed dialling — Activate speed dialling.
Anykey answer — Activate anykey answer.
Line in use — This setting (network service) is shown only if the SIM card supports
two subscriber numbers, that is, two phone lines. Select which phone line you want
to use to make calls or send text messages. Calls on both lines can be answered
irrespective of the selected line. If you select
Line
2, and have not subscribed to this
network service, you are not able to make calls. When line 2 is selected,
is
displayed in the home screen.
Line change — Prevent phone line selection (network service), if supported by
your SIM card. To change this setting, you need the PIN2 code.
© 2010 Nokia. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents