Nokia X6-00 User Manual page 143

Your device must be connected to the WLAN. Some WLANs are protected, and
•
you need an access key from the service provider to connect to them.
An internet access point created for WLAN. Use the access point for applications
•
that need to connect to the internet.
A WLAN connection is established when you create a data connection using a WLAN
internet access point. The active WLAN connection ends when you end the data
connection.
You can use WLAN during a voice call or when packet data is active. You can only be
connected to one WLAN access point device at a time, but several applications can
use the same access point.
Note: In France, you are only allowed to use WLAN indoors.
Features that use WLAN, or that are allowed to run in the background while using
other features, increase the demand on battery power and reduce the battery life.
Your device supports the following WLAN features:
IEEE 802.11b/g standard
•
Operation at 2.4 GHz
•
Wired equivalent privacy (WEP), Wi-Fi protected access (WPA/WPA2), and
•
802.1x authentication methods. These functions can be used only if they are
supported by the network.
Important: Always enable one of the available encryption methods to increase the
security of your wireless LAN connection. Using encryption reduces the risk of
unauthorised access to your data.
When the device is in the offline profile, you can still use WLAN, if available.
Remember to comply with any applicable safety requirements when establishing
and using a WLAN connection.
© 2010 Nokia. All rights reserved.
Connectivity 143