Panasonic SC-PM29 Operating Instructions Manual page 23

^
SLEEP CLOCK/ PLAY/
TIMER REC
- AUTO OFF
^
TITLE IN DISPLAY DIMMER
DISC ABC DEF
1 2 3
SLEEP PROGRAM GHI JKL MNO
4 5 6
PLAY MODE PQRS TUV WXYZ
7 8 9
- AUTO OFF
REPEAT SPACE l"#
>
0 10
=
DEL
ALBUM /REW /FF
u i
TUNER/ TAPE CD
BAND 7 /
q h
AUX CLEAR
g
VOL ENTER VOL
PLAY LIST RETURN
TITLE
RE-MASTER INTRO MARKER SEARCH
S.SOUND EQ SOUND SURROUND MUTING
CLOCK/
Remote control only
TIMER
Using the play/record timer
To check settings
While the unit is off, press [CLOCK/TIMER] twice.
The settings for the timer you have set appear as follows:
Play timer
1. Play start time
2. Play fi nish time
3. Play source
4. Playback volume
While the unit is on, press [CLOCK/TIMER] to show the
start and fi nish times.
Each time you press the button:
To enjoy a source after setting a timer
The volume level (for play timer) and source are stored
and the timer will start in these preset conditions. However,
the CD numbers do not get stored.
1
2
Note
If you turn the unit off and on again while a timer is
functioning, the fi nish time setting will not be activated.
If the unit is on, the timer will not function. The unit must
be in the standby mode.
If AUX is selected as the source, when the timer comes
on, the system turns on and engages AUX as the
source.
If you want to playback or record from a connected unit,
set the other unit's timer to the same time. (See the
other unit's manual for details.)
Using the sleep timer
Use the sleep timer to turn off the unit after a certain
number of minutes.
While playing something:
Press [SLEEP, -AUTO OFF] to select:
SLEEP 30
To cancel
Press [SLEEP, -AUTO OFF] to select "SLEEP OFF".
To confi rm the remaining time
Press [SLEEP, -AUTO OFF] once.
To change the time remaining
Press [SLEEP, -AUTO OFF] to show the remaining time,
and then press [SLEEP, -AUTO OFF] to select the new
time.
Note
The sleep timer turns off when you start recording a CD.
The play and sleep timer or the record and sleep timer
can be used together.
The sleep timer always has priority. Be sure not to
overlap timer settings.
Using the timers
Record timer
1. Recording start time
2. Recording fi nish time
3. Recording source
CLOCK zPLAY times
Original display
After step 4, start playing the source.
Reset the CD numbers if you have changed any,
confi rm that a CD or cassette is inserted, then press [
to put the unit on standby.
SLEEP 60 SLEEP 90
SLEEP OFF
zREC times
^ ]
SLEEP 120
23