1. Manuals
  2. Brands
  3. TAG MCLAREN AUDIO Manuals
  4. Computer Hardware
  5. AV32R
  6. User manual

TAG MCLAREN AUDIO AV32R User Manual

Avantgarde dual processor
Hide thumbs Also See for AV32R:
Table of Contents

Advertisement

Quick Links

See also: Operating Manual
4 controls
6 welcome
7 safety first / when you need additional assistance
8 preparing your remote control - installing batteries
9 connectivity
analog audio inputs ................................................9
5.1 analog bypass ..................................................9
digital audio inputs..................................................9
AC-3 RF Laserdisc interface ....................................1 0
composite video inputs...........................................1 1
S-video inputs .......................................................1 1
audio outputs main zone ........................................1 2
audio outputs zone 2 .............................................1 2
speaker positioning ...............................................1 3
analog and digital tape outputs ..............................1 4
TAGtronic Bus routing ............................................1 5
DAB digital radio antenna......................................1 5
action switches......................................................1 6
composite video outputs .........................................1 8
S-video outputs......................................................1 8
2 0 basic system set-up: an example
2 1 switching on / standby
2 3 status screen: all essential user settings at a glance
2 5 volume control - main & zone 2
changing volume...................................................2 5
changing between main and zone 2 .......................2 5
start volume ..........................................................2 5
maximum volume ..................................................2 5
|
c o n t e n t s
1

Advertisement

Table of Contents
loading

Related Manuals for TAG MCLAREN AUDIO AV32R

Summary of Contents for TAG MCLAREN AUDIO AV32R

  • Page 1: Table Of Contents

    c o n t e n t s 4 controls 6 welcome 7 safety first / when you need additional assistance 8 preparing your remote control - installing batteries 9 connectivity analog audio inputs ..........9 5.1 analog bypass ..........9 digital audio inputs..........9 TAGtronic Sync Link..........1 0 AC-3 RF Laserdisc interface ........1 0 composite video inputs...........1 1...
  • Page 2 Pro Logic II Music ..........4 0 AV32R DAB digital radio tuning......4 0 T32R tuning via TAGtronic Bus ........4 0 quick settings ............4 1 4 2 The AV32R set-up menu : introduction 4 4 first time set-up wizard 4 5 Change Set-up night mode ............4 5 front panel configuration ........4 6...
  • Page 3 DAB digital radio ..........71 action switches............74 7 5 TAGtronic Bus in and out of standby ..........7 5 sending remote commands via AV32R .....7 6 controlling (multiple) amplifiers........7 7 corresponding with DVD32/DVD192 & T32R ....7 8 8 1 hardware and software upgrades how to enable a new software option ......8 2...

  • Page 4: Analog Bypass

    20 ac supply socket 27 analog input sockets, incl. tape input 7 remote command receiver window 14 DAB Digital Radio antenna - option 21 TAGtronic Communications Bus 1 . only available if your AV32R ‘Dual Processor’ is equipped with the ‘7.1’ option...
  • Page 5 TAG McLaren Audio exists with one aim in mind: to produce the very best audio and audio-visual equipment Dr. Udo Zucker Chief Executive Officer in the world. TAG McLaren Audio Like many people, I often have my best ideas when relaxing to a piece of music or watching a movie.
  • Page 6 For on-line help select the ? using the cursor keys, followed by ok 1. Throughout the manual, bold print indicates the lettering that you will find on the panels of your AV32R ‘Dual Processor’ or the remote.

  • Page 7: Installing Batteries

    The AV32R ‘Dual Processor’ is supplied with a ‘learning’ remote. This is supplied pre-programmed for TAG McLaren Audio home cinema products, but may easily be re-programmed to control other devices using an infra-red remote within your home audio and audio-visual system.

  • Page 8: Audio Inputs

    Please have a look at the rear panel of your AV32R ‘Dual Processor’ and you will see many potential connections can be made to your AV32R ‘Dual Processor’. Fortunately these connections can be separated in logical groups which are described in the...

  • Page 9: Ac-3 Rf Laserdisc Interface

    Radio Frequency (RF)-encoded information stored on the Laserdisc into an SPDIF-compatible Dolby Digital bitstream, allowing the AV32R ‘Dual Processor’ then to decode this data in the same way as if the signal had come from a DVD encoded with Dolby Digital.

  • Page 10: Video Inputs

    The AV32R ‘Dual Processor’ can process analog Composite video and S-video signals. Composite video The AV32R ‘Dual Processor’ has four 75 Ohm Composite video inputs at VCR-C TV-C the rear, labelled for convenience TV-C, VCR-C, LD-C and SAT-C.

  • Page 11: Audio Outputs Zone 2

    • second listening position, used for listening to two-channel music at the other end of a 7.1 cinema layout. 1. If your AV32R is equipped with the back channel option - otherwise there will only be 5.1 channels...

  • Page 12: Speaker Positioning

    1. If your AV32R is equipped with the ‘7.1’ option - otherwise there will only be 5.1 channels 2. THX Surround EX (Dolby EX) and DTS-ES 6.1 recordings provide an additional back channel, which the AV32R ‘Dual Processor 7.1’ can...
  • Page 13 analog tape output The TAPE OUTput contains a copy of the audio signals routed to the RIGHT and LEFT front channel outputs, without applying volume control or mute. Connect the recording input of an analog tape recorder to TAPE TAPE OUT if you want to record the signal of the RIGHT and LEFT front channels.

  • Page 14: Dab Digital Radio Antenna

    Details are explained on page 75. You can connect your AV32R ‘Dual Processor’ to the TAGtronic Bus using a ‘straight’ CAT5 cable with RJ45 connectors. Straight means pin 1 of the connector on one end, connects to pin 1 of the connector on the other end.

  • Page 15: Action Switches

    Action Switches are controlled (opened/closed) by the AV32R ‘Dual Processor’ when selecting an input source or when switching the AV32R ‘Dual Processor’ into standby. A description of the AV32R’s Action Switch configuration menu can be found on page 74. internal circuitry...

  • Page 16: External Infrared Receiver Connections

    IR receiver connections REMOTE The AV32R ‘THX Ultra2 Dual Processor 7.1’ includes two sockets at the rear panel, named REMOTE IN and REMOTE OUT. They can be used to place the AV32R ‘THX Ultra2 Dual Processor 7.1’ out of sight when connected to a wired infra-red remote system.

  • Page 17: Composite Video Outputs

    The AV32R ‘Dual Processor’ can route any VCR-C TV-C of its Composite video inputs to a pair of COMPOSITE video outputs, labelled OUT and +OSD. + OSD LD-C SAT-C C O M P O S I T E...

  • Page 18: 9 On Screen Display

    For details on how to configure the OSD, see page 48. video standard and signal conversion The AV32R does not convert between composite and S-video. If you want to use composite and S-video sources - you must connect all signals to your television.
  • Page 19 ANALOG INPUT SAT tv connection connect the composite input composite video of your TV to the AV32R ‘Dual connect the composite video Processor’ using the COMPOSITE +OSD output of a satellite receiver (probably labelled ‘video’ or and the TV’s S-...

  • Page 20: Power Connection

    2. This text will be overwritten by your personalized startup message, for details see page 46. 3. If the AV32R ‘Dual Processor’ is powered down using the front panel mounted on/off switch whilst in standby mode, it will go back into...

  • Page 21: 2 Controlling Remotely

    REMOTE SELECTION keys. Once the AV32R ‘Dual Processor’ has been selected, it can be controlled in its entirety from the remote. The red ‘remote control active’ LED on the front panel of the AV32R ‘Dual Processor’...
  • Page 22 Logic II Movie. The sound is replayed at a volume level of -4.5dB below reference level (assuming the AV32R ‘Dual Processor’ was calibrated using a SPL meter - for details see page 62). The sound balance is as calibrated, i.e. no balance shifts were made to the front/rear or left/right.

  • Page 23: Preparing The Remote Control

    The AV32R ‘Dual Processor’ will remain selected until another device, e.g. dvd is selected. source selection The AV32R ‘Dual Processor’ remote has 11 source selection keys, tuner labelled tv, vcr, sat, tuner, aux, cd, ld, dvd, md, dab and tape , to which the user can freely assign any audio and video inputs.

  • Page 24: Max Volume

    This feature allows to set a maximum volume level that the AV32R will be allowed to be set to. You can set a different max volume (or none at all) for the main zone and zone 2. Max volume is set within the Change Set-up ->...
  • Page 25 ‘digital hiss' coming from your speakers. When the AV32R ‘Dual Processor’ leaves the factory it is set to Mute using relays: No, meaning it will use its relays as little as possible. However, to prevent any ‘digital hiss' switch the AV32R ‘Dual Processor’ into the Mute using relays: Yes mode, which is done through Change Set-Up, Output/Speaker Options ->...
  • Page 26 left/right balance Press the F (E) button on the front panel or the F, (E) key on the remote to move the sound balance to the left (right) speakers. Keeping either the button or the key held down will move the sound analog + progressively further to the side.
  • Page 27 Sound is recorded in a variety of encoded formats and on many different source materials, with the recording in either analog or digital form. The AV32R ‘Dual Processor’ can decode many different recording formats: analog recordings Analog recordings do not contain information about their...

  • Page 28: Thx Ultra

    The advances in the THX specification left and right surround signals are embodied in the new THX Ultra2, different). available in the AV32R ‘Dual Processor’, accommodate the changes that have occurred and specify systems that can perform superbly Timbre matching™ is applied to the...

  • Page 29: Content

    THX recommend that the surround back loudspeakers are placed quite close together, facing towards the listener, although during the setup of the AV32R ‘Dual Processor’ you will be asked whether the surround back speakers are close together or apart (for...
  • Page 30 To apply THX Music post-processing, press the THX key on the remote or the THX button on the front panel, once or repeatedly until you selected your desired mode. 1. THX ULTRA2 and THX Music are only available if your AV32R ‘Dual Processor’ is equipped with 7.1 channels and system setup includes back speaker(s).
  • Page 31 Press either the THX key or button again to turn off THX Cinema post-processing. 1. THX SURROUND EX is only available if your AV32R ‘Dual Processor’ is equipped with 7.1 channels and system setup includes back speaker(s).
  • Page 32 The following decoding and surround modes are available MONO In this mode the AV32R ‘Dual Processor’ combines the left and right channels of a stereo signal to produce a mono signal. If the centre speaker is set to bass-limited, for details see page 57, or the centre speaker isn’t connected, the AV32R ‘Dual Processor’...
  • Page 33 - explosions shake the room like never before! 1. Some Dolby Digital-encoded discs contain control information to allow the AV32R ‘Dual Processor’ to detect PRO LOGIC automatically. For more details, see page 53.
  • Page 34 DOLBY DIGITAL This mode is automatically selected when a Dolby Digital-encoded disc is played. MPEG-2 This mode is available as an option, please refer to ‘installing a software option’ on page 82. This mode is automatically selected when an MPEG-2- encoded disc is played. DOLBY DIGITAL EX DOLBY DIGITAL EX is only available if your system setup includes back speaker(s) Home cinema uses many different surround decoding formats.
  • Page 35 programme source format display and audio status The programme source format display area of the front panel display indicates which output channels are available at any time. You can also press shift + surround and the audio status screen comes up- in the example receiving two channel Dolby Digital data stream processed into 5 channels, using Pro Logic II Movie.
  • Page 36 T32R radio tuning Similar to Internal Radio Tuning but applied to the T32R radio, if connected to the AV32R ‘Dual Processor’ via TAGtronic Bus. 1. the cursor assignment will only control its associated function if it is available at that time.
  • Page 37 AV32R ‘Dual Processor’ into standby. cursor movement inside the set-up menu If the AV32R’s set-up menu (or any on screen text expecting cursor key operation) is activated, the cursor keys will work as up, down, left and right.
  • Page 38 Run the Wizard if you are new to the AV32R. This will ensure you enter all the essential parameters required for optimal performance. Details are given on page 44. 1. The AV32R ‘Dual Processor’ operating software is upgradable, so future versions may look and operate slightly differently to the way described in this manual.
  • Page 39 AV Options + Status Select this menu if you want to know everything about the configuration of your AV32R ‘Dual Processor’, i.e. its hardware and software configuration and the processing status. This menu allows you also to activate a Software Option using an Option Code, for details how to enable a software option, refer to page 81.
  • Page 40 You will need a tape measure and, ideally, a sound level meter for best results Essential If you have not set up the AV32R ‘Dual Processor’ to match your loudspeakers, you should choose - Part 1: Essential. It is important that you perform this...
  • Page 41 DD/DTS night mode The AV32R ‘Dual Processor’ incorporates a Night Mode, which reduces the dynamic range for quieter listening, so that you can comfortably hear quieter passages at lower volume levels. The loud elements (such as violent explosions) become slightly quieter and the quiet elements (such as soft speech) become slightly louder.

  • Page 42: Front Panel Configuration

    Here you can enter a personalised message, which will appear on the front panel display for a few seconds each time you turn on your AV32R ‘Dual Processor’. If you do not wish to set a personal message, delete any entry, should one already exist.
  • Page 43 ‘Dual Processor’. 1. The front display of the AV32R ‘Dual Processor’ is a so-called ‘Vacuum Fluorescent Display’ (VFD), a technology known for excellent readability and brightness. The average life of a VFD is well over 10 years, requiring no maintenance. However, a VFD will slowly reduce its maximum brightness over time, but only those segments which are illuminated will become darker over time.
  • Page 44 This is one of two very similar screens, available for the T32R (if connected via the TAGtronic Bus) and the AV32R’s internal DAB digital radio, if available. It allows the scrolling radiotext, if one is received, to be displayed on the front panel and/or superimposed to the video signal.
  • Page 45 video inputs This submenu allows the configuration of all video inputs The video inputs can be renamed to a name of your choice- the screen for the Composite inputs is shown below, as an example. Video outputs are explained on page 18. changing a name of a video input Select the name you wish to alter, and the first character will flash, indicating the...

  • Page 46: Analog Audio Inputs

    A value should be selected that results in an equal volume level for all your analog inputs without overloading the input. You can let the AV32R ‘Dual Processor’ let the input calibrate for you, as described on the next page.
  • Page 47 The AV32R ‘Dual Processor’ offers a huge number of different processing modes, described in chapter ‘surround modes’ on page 28. This feature allows you to specify which surround mode you like the AV32R ‘Dual Processor’ to engage when you select an input source associated with the analog audio input, in our example TV.
  • Page 48 The AV32R ‘Dual Processor’ will automatically detect this and will decode the CD in DTS mode. You can set the AV32R ‘Dual Processor’ to mute while auto sensing in order to prevent the very short burst of white noise on your front loudspeakers. You may find that with DTS Delay: On you miss a very short section (fractions of a second) of...

  • Page 49: Tagtronic Sync Link 1

    Dolby Surround. Dolby Digital DD2 includes the ability to set an indicator (a flag), allowing the AV32R ‘Dual Processor’ to automatically detect if surround information is present or not, but unfortunately it has been found that many DVD authors and digital satellite broadcasters flag their programmes incorrectly.
  • Page 50 Dolby EX recordings. , if you When To Use Height Spkr if Matrix/THX Surr. EX Is Active want the AV32R ‘Dual Processor’ to engage the height channel decoder whenever you engage post + Matrix THX Surround EX processing.
  • Page 51 5.1 bypass You can configure the 5.1 Bypass as 5.1 Bypass or as 3X Stereo. Configured as 3X Stereo the LEFT/RIGHT, CENTRE/SUB and the S will form three new stereo pairs. You can enter the name of your choice for the 5.1 Bypass or the three 3X Stereo pairs.
  • Page 52 Select Don’t Change if you want the AV32R ‘Dual Processor’ not to change the currently selected video input, e.g when switching to tuner.
  • Page 53 If no speaker is connected select None. Bass Cutoff The AV32R ‘Dual Processor’ will re-direct low frequency signals Bass Limited loudspeakers cannot handle to full range / subwoofer loudspeakers. You need to set the Bass Cutoff filter frequency between 40Hz and 150Hz at which this happens according to the bass handling capabilities of your Bass Limited loudspeakers.
  • Page 54 The AV32R ‘Dual Processor’ needs to know the distance of your loudspeakers from your ideal seating position. These measurements are used to correct for the time delays (of the sound reaching your ears) caused by the difference in the distance between each loudspeaker and your listening position.
  • Page 55 There can be none, one or two back speakers, being either Full Range or Bass Limited. If two back speakers are used, then the AV32R ‘Dual Processor’ need to know the space they are apart. This will allow the THX Advanced Speaker Array technology to optimise the algorithm when using THX Ultra2 post processing.
  • Page 56 Subwoofer type The AV32R ‘Dual Processor’ need to know the type of subwoofer you are using in order to apply the correct processing. Select THX Ultra2, if you have a THX Ultra2 certified subwoofer or one which can produce low frequencies down to 20 Hz.
  • Page 57 subwoofer There is an important additional set-up menu within the SUBWOOFER menu, the BASS REDIRECTION RULES, which define the use of the subwoofer with those processing modes which do not have a LFE (0.1) effect channel. If LR=Bass Ltd If your left and right front speakers are bass- limited and you would like your subwoofer, if available, to take the bass frequencies your left/right...
  • Page 58 During the calibration the AV32R ‘Dual Processor’ will send the THX-specified pink noise test signal to the selected loudspeaker so that the output level from each channel may be adjusted to achieve a 75dB SPL sound level. Press ok to start the calibration. Adjust the channel output level using the VOL + and VOL - keys until your SPL meter reads 75 dB.
  • Page 59 5.1 replay through 7.1 loudspeakers The following feature is important if your system uses two back surround channels with or without an additional subwoofer. It allows enhancing surround formats which otherwise provide only 5.1 channels, e.g. Dolby Digital 5.1 or DTS 5.1.
  • Page 60 Almost no listening room is perfect- there will alway be certain frequencies which are enhanced or attenuated. The AV32R’s Room Equalisation program TAG McLaren Room EQualisation will assist you in correcting those anomalies in your listening room by compensating the output signal accordingly.

  • Page 61: Dolby Headphone

    Room 3. to Zone 2) are muted. Two typical applications are: an AV32R ‘Dual Processor 7.1’ used in a 5.1 home cinema layout. In this instance the two surround back channels can conveniently used for connection of a headphones. Switching zones, switches between 5.1 and headphones.
  • Page 62 Dolby Pro Logic IIx Dolby Pro Logic IIx is a very advanced sound format, producing 6.1 or 7.1 output channels from stereo or multi-channel sources, for further details also see page Three different modes are available: Pro Logic IIx Movie, Pro Logic IIx Music and Pro Logic IIx Game.
  • Page 63 S- Video (Composite) switcher output if you select a S-Video (Composite) video source. However, if you like to see the AV32R ‘Dual Processor’ on-screen text on the Composite and S-Video +OSD outputs, independently of the video source selected, set Turn Off Unused Outputs to No.
  • Page 64 PSM192’s input switching and functionality via the TAGtronic Bus. connections - also see your DVD32 user manual • Connect the AV32R and the DVD32 via the TAGtronic Bus, as described on page 15. • Connect the AV32R’s COMPOSITE OUT+OSD video output (if you have video sources connected to your AV32R using composite video) to the DVD32’s input PROGRESSIVE...

  • Page 65: Composite Video Inputs 1

    Now all Composite and S-Video inputs of the AV32R are routed through the PSM192 installed in the DVD32, from which they are output (using either RGBs or component YPrPb) to your display device using latest Progressive Scan technology. PSM output format This allows you to set the video format of the PSM192 within the DVD32 to RGB or YPbPr Component.
  • Page 66 Film Detection Mode This parameter assists the PSM192 in deciding whether the incoming video signal has been recorded using a video or a film camera - essential to achieve highest vertical picture resolution. Video will be most appropriate for most television broadcasts, whilst High Film Bias is best for most DVDs.
  • Page 67 Using high-quality, 50 Ohm antenna cable terminated with a 50 Ohm BNC connector, connect your DAB antenna to the socket marked DAB OPTION on the rear of the AV32R ‘Dual Processor’. Even if you do not have a high- performance outdoor antenna, you can still use, although at reduced performance, the AV32R’s small...

  • Page 68: Front Panel Display

    Assuming the Digital Radio has found any station, the front display of the AV32R ‘Dual Processor’ will look similar to this: Any change, such as turning VOLUME knob, pressing the VOL +, VOL - or surround keys will...
  • Page 69 The menu Radiotext Configuration... leads to a menu, allowing you to configure the radiotext display on the front display and on-screen: Whilst listening to the AV32R’s digital radio you can display scrolling Radiotext on the front panel display. You can also display scrolling Radiotext on your display device, using the AV32R’s on-screen text...

  • Page 70: Action Switches 1

    Page 2 also includes the action when the AV32R ‘Dual Processor’ is going into standby. Select for each switch the required action, you want the AV32R ‘Dual Processor’ to carry out, when the corresponding input source selection key is pressed: contact closure contact opening...
  • Page 71 This menu allows you to define those products, which you like to switch in/out of standby with the AV32R ‘Dual Processor’. Amplifiers covers all TAG McLaren amplifiers featuring a TAGtronic Link. You usually have the option Yes (‘do what the AV32R ‘Dual Processor’...
  • Page 72 DVD32/192 or T32R (Yes- when on input only). The input the AV32R ‘Dual Processor’ uses to connect to the digital audio output of the DVD32/192 is specified in the TAGtronic BUS -> DVD32/192 menu, as shown on page 80. The inputs the AV32R ‘Dual Processor’ uses to connect to the analog and digital audio output of the T32R are specified in the TAGtronic BUS ->...
  • Page 73 This feature allows you to place products out of sight Set Synchronise display Brightness to Yes to allow all units, connected to the AV32R ‘Dual Processor’ via the TAGtronic Bus, to match the intensity of their displays with that of the AV32R ‘Dual Processor’. For more details about this feature see page 47.
  • Page 74 If your system includes more than one amplifier connected to the AV32R ‘Dual Processor’ via the TAGtronic Bus (and they are all switched on) but the AV32R ‘Dual Processor’ wasn’t able to detect all of them, then you might need to configure them for multiple amplifier support first.
  • Page 75 Mute, Standby and Module control Set Mute to On, if you want the AV32R ‘Dual Processor’ to mute the amplifier when the AV32R ‘Dual Processor’ is muted - this will protect your loudspeakers better Set Standby to On, if you want the AV32R ‘Dual Processor’ to switch your amplifier in and out of standby, if the AV32R ‘Dual Processor’...
  • Page 76 T32R (when on radio only), always (when on any input) or not at all (off). Control of the T32R by the AV32R You can even control the main functionality of your T32R from the AV32R’s remote control, for details see page 40.
  • Page 77 Available Hardware Upgrades if you want to know what buying next. This AV32R ‘THX Ultra2 Dual Processor 7.1’ includes all available upgrades - bar one, the upgrade to AV32R. For more information visit www.tagmclaren.com enabled software options...

  • Page 78: Dolby Headphone

    To enable an option you need an Option Code, which is available from your TAG McLaren Audio retailer or directly from TAG McLaren Audio. You need to quote the serial number of your AV32R ‘Dual Processor’, attached to the rear panel of your AV32R ‘Dual Processor’ as well as the AV32R’s unique 18 digit Product ID, see page 81 for details.
  • Page 79 R E M O T E S E L E C T I O N appropriate REMOTE SELECTION key on the AV32R ‘Dual Processor’ remote. 2. Place the AV32R ‘Dual Processor’ remote and the remote of the unit you want to control on a flat surface. Line up the remotes analog +...
  • Page 80 Repeat steps 4 through 6 to program further keys. 7. Once you have finished teaching the AV32R ‘Dual Processor’ remote all the desired commands from the original remote, you must store them by simultaneously pressing the appropriate REMOTE SELECTION key and the ok key for about four seconds.
  • Page 81 flash red twice then go off. remote control warning You will, from time to time, have to replace the batteries in your AV32R ‘Dual Processor’ remote. During the battery changing operation the remote will remember your programmed commands, but you should avoid pressing any key on the remote during battery changing as you may lose all your stored settings.
  • Page 82 erasing single commands To erase a learnt command from a key: R E M O T E S E L E C T I O N 1. Simultaneously press the REMOTE SELECTION key for the appropriate device and the ok key until the status LED turns analog + station + functions...
  • Page 83 One of the most flexible aspects of the AV32R ‘Dual Processor’ is that its complete software is stored in re-programmable memory. Details of future upgrades are published on www.tagmclaren.com. The AV32R ‘Dual Processor’ can be re-programmed by connecting a suitably equipped and configured PC using the TAGtronic Programming Cable (option).
  • Page 84 AV32R ‘Dual Processor’ will not respond as usual; the front display and all LEDs will stay off - the AV32R ‘Dual Processor’ will look like broken. This is as expected, the AV32R ‘Dual Processor’ waits for a new program to be loaded.
  • Page 85 In order to maintain the appearance of your AV32R ‘Dual Processor’, you can clean it as follows: • before cleaning, always disconnect your AV32R ‘Dual Processor’ from the AC supply • any grease or dirt on the case may be removed with a soft, lint-free cloth moistened slightly with a mild solution of warm water and detergent or washing-up liquid.

  • Page 86: Trademark Acknowledgements

    trademark acknowledgements Manufactured under licence from Dolby Laboratories. ‘Dolby’, ‘Pro Logic’, ‘AC-3’ and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved. Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and other world-wide patents issued and pending.

Table of Contents