Sony FD Trinitron WEGA KV-20FA210 Operating Instructions Manual page 21

Operating instructions
Connecting a TV, VCR, and Satellite Receiver
From
cable/
1 4 antenna
__ _ VCR 2 I
Satellite receiver
Rear of TV
V deo (ye,ow)
3 Audio L(white)
Audio R(red)
1
2
3
4
Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite
receiver.
Connect the coaxial cable from your cable service or antepala to the IN jack on your VCR.
Using a coaxial cable (not supplied), copalect the OUT jack on your VCR to the VHF/UHF
jack on your TV.
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your VCR.
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
Usingyour TV with this connection
This copalection allows you to do the following:
Program your Sony remote control to operate your VCR or satellite receiver (see page 5).
Turn on your VCR to enable your satellite receiver to work with this connection.
To activate your remote, press CD to operate your VCR or _r_C_ to operate your satellite
receiver.
Press _ repeatedly to switch between VCR input (VIDEO input), VHF/UHF
(local channels or unscrambled), or your cable box (cable system or scrambled channels).
16