Dvi-Hdtv-Equipped Device - Sony WEGA KLV-S23A10 Operating Instructions Manual

Connecting the TV
DVI-HDTV-Equipped
Device
To connect a device with DVI-HDTV connector
If the device does not have an HDMI connector, you can connect tile TV's
HDMI IN connector to the device's DVI-HDTV output connector using a
DVI to HDMI cable.
1 Use a DVI to HDMI adapter or cable to connect the device's DVI-
HDTV output connector to the TV's HDMI IN connector on the right
side panel.
_q The DV!-HD-IV V!DEO connector does not provide audio, so audio
cables must be connected to provide sound when a DVI to HDMI
adapter is used.
Do not connect aPC to the TVIs HDMI input. Use the PC !N (RGB
IN) connector instead when connecting a PC.
Use an Audio cable to connect tile device's AUDIO output jacks to tile
TV's AUDIO input jacks on the right side panel.
DVI-HDTV-Equipped Device
Dii
Right side of TV
o
"..-I
,<
DVI to HDMI
adapter or cable
Audio cable
AUDIO-R (red)
AUDIO-L (white)
Notes on Using This Connection
Watch the device Press WEGA GATE to select the DVl-HDTV-equipped input (Video 5) in the
External Inputs list.
or
Press TV/VI DEO repeatedly to select the DVI-HDTV-equipped device input
(Video 5).
Label video inputs to easily See the instructions for setting up Label Video Inputs on page 61.
identify equipment connected
to the TV
27