Connecting the TV
Notes on Using This Connection
Watch the DVD player
Press WEGA GATE to select the DVD player input (Video 4) in the External Inputs
list.
or
Press TV/VIDEO repeatedly to select the DVD player input (Video 4).
Set up the remote control to
You nmst prograln the remote control. See "Programming
the Remote Control" on
operate the DVD player
page 34.
Acfiv;_ie the remoie coi_trol to ................
Press DVD)VCR (FUNCTION) .....................................................................................................
operate the DVD player
e_
Control DVD fimctions with the
See "Operating a DVD Player or DVD Changer" oil page 36.
remote control
,,_
Label video inputs to easily
See the instructions for setting tip Label Video Inputs oil page 61.
""1
identify equiplnent connected to
'<
the TV
To connect a DVD player with S VIDEO and audio connectors
If your DVD player does not have component
video (YPBPR) jacks,
or the
component
video inputs are already
connected
to another device, use this
connection.
1
Use an S VIDEO
cable to connect the DVD player's
S VIDEO output
jack to the TV's S VIDEO
input jack (VIDEO
1 or 3).
2
Use an audio cable to connect
the DVD player's
AUDIO output jacks to
the TV's AUDIO input jacks (VIDEO
I or 3).
_j
If your DVD player is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
25