Fuser Unit; Caution On Handling The Fuser Unit; Replacing The Fuser Unit - TallyGenicom 9050N User Manual

NOTE: After removing the Toner Cartridge, put it into its original aluminum bag or wrap it with a thick
cloth.
8. Close the front cover and side covers securely.
9. Lift the printer and move it gently. If the printer is to be moved over a long distance, pack
it inside a box.

Fuser Unit

This section explains the Fuser unit replacement.

Caution on Handling the Fuser Unit

The fuser unit is included as one of the regular replacement parts. Before replacing the fuser
unit, open the box of the regular replacement parts and get the new fuser unit ready.
When handling the fuser unit, take note of the following

Replacing the Fuser Unit

1. Switch off the power of the printer and leave it for 30 minutes until the fuser unit cools
down.
User Manual
CAUTION: Never touch a labeled area found on or near the heat roller. You can get
burned. If a sheet of paper is wrapped around the heat roller, do not try to remove it by
yourself to avoid injuries or burns. Switch off the machine immediately, and contact
your service provider.
Be sure to switch off and unplug the machine before accessing the interior of the
machine for cleaning, maintenance, or fault clearance. Access to a live machine's
interior can cause electric shock.
Fuser Unit
Maintenance
7-5