Nokia C110 User Manual page 32

You can enter and edit the personal WEP key in text format, too. Click
As Text, and type in the text. Click OK and the system converts the text into
hexadecimal format. You can copy and paste the text by using the CTRL+ C
and CTRL+V key combinations respectively.
Note that on the Personal Key tab you cannot select a personal WEP key to be
used. To select a personal key to be used with a certain profile:
Go to the Profiles page, select the profile you want to modify, click Edit, and
1
select the Security tab.
Select Use WEP security, then select Use a personal WEP key. Click Select.
2
A list of personal WEP keys is displayed. Select a personal key from the list and
3
click OK.
Click OK to close the Edit Profile dialog box.
4
When you create profiles, you are asked to specify whether you want the DHCP
server to allocate an IP address for the wireless LAN card, and whether you want
your computer to log on to a domain. By default, these settings are managed
automatically as defined in each profile.
When the Manage TCP/IP properties together with profiles check box is cleared,
profiles will be activated without TCP/IP settings. You can change the settings
manually in the Control Panel.
Profiles will be activated without domain settings if the Manage domain settings
together with profiles check box is cleared. You can change the settings manually
in the Control Panel.
Both of these check boxes must be selected if you want the profiles to be
able to log you on to a domain or allocate IP addresses.
By default, the network name is case-sensitive. To change this property, clear the
Case-sensitive network names check box.
If you want the system to allocate you IP addresses automatically, select the Renew
DHCP automatically when needed check box. You can also renew your IP address
whenever you want by clicking the Renew DHCP Now button.
For the changes to take effect, click the Apply button. If you have made changes to
the settings but wish to restore the previous settings, click Restore.
32