Nokia C110 User Manual page 35

The system administrator can store important information such as personal WEP
keys and network profiles on a smart card. The administrator can then give users
smart cards which contain the necessary network settings and encryption keys for
quick network access. The user inserts the smart card into the Nokia C110/C111,
inserts the wireless LAN card into a compatible computer, and is then ready to
access the wireless LAN.
To store data on a smart card:
Slide the smart card into the smart card slot of the Nokia C110/C111. Make sure
1
that the metal contacts of the smart card are facing down and that the beveled
corner is on the right. See Figure 7 on page 44.
Insert the wireless LAN card in your computer and start the Nokia C110/C111
2
program. Go to the Administrator page. In the Smart card area
click Add/Remove.
The Smart Card dialog box opens. Select the items on the left to be copied to the
3
smart card. Click the arrow button pointing to the right. If you want to remove
items from the smart card, select the desired items on the right and click the
arrow button pointing to the left.
You can type additional information about the smart card in the Smart card
4
description text box.
Click OK to save the selected items on the smart card.
5
Profiles are copied to a smart card when the Keep data after storing
on smart card check box is selected. If this check box is cleared, the
selected profiles will be removed - instead of being copied - from the
system to a smart card.
If you want to empty the contents of a smart card, click Erase All. Note that all
items on a smart card will be removed, including the smart card description. If you
want the program to re-read the contents of a smart card, click Reload.
The system administrator can create installation disks which contain all the
necessary settings needed for accessing a wireless LAN. The custom installation
package can also be saved on a hard disk.
The installation disk can be used for distributing profiles. All the desired settings
and profiles can be copied to the installation disk, which then offers an end user
quick access to a wireless LAN. The end user does not have to configure settings in
order to be able to connect to a network.
To generate an installation disk:
35