Table of Contents
Advertisement
W A P s e r v i c e s
•
Authentication type
Secure
or Normal.
•
Data call type
- Select
or ISDN.
•
Data call speed
speed you want to use, or select
Automatic.
Automatic
available if the currently selected
data call type is Analogue. The
actual data call speed depends on
the service provider.
•
Login type
- Select
Automatic. If you select
Automatic, the login type uses
the user name and password
keyed in for the following
settings. If you select Manual,
the login information must be
entered when establishing a
connection.
•
User name
- Key in the user
name and press OK.
•
Password
- Key in the password
and press OK.
Settings when GPRS is the
selected data bearer
•
GPRS connection
Always online
or
If you select
Always
phone automatically registers
with a GPRS network when you
switch the phone on. Starting a
WAP application creates the
connection between your phone
and the network, making data
transfers possible. When you end
42
- Select
Analogue
- Select the
is only
Manual
or
- Select
When
needed.
online, the
Copyright © 2006 Nokia. All rights reserved.
the application, the GPRS
connection ends but the
registration to the GPRS network
remains.
If you select
When
GPRS connection is established
when you connect to a WAP
service and is closed when you
end the WAP connection.
•
GPRS access point
access point name and press OK.
An access point name is needed
to establish a connection to a
GPRS network. You can obtain
the access point name from your
network operator or service
provider.
•
IP address
- Key in the address,
press
for a dot and press OK.
You can obtain the IP address
from your network operator or
service provider.
•
Authentication type
Secure
or Normal.
•
Login type
- Select
Automatic. If you select
when the
GPRS connection
to
Always
online, the
online
connection will be
disabled.
•
User name
- Key in the user
name and press OK.
•
Password
- Key in the password
and press OK.
needed, the
- Key in the
- Select
Manual
or
Manual
is set
Always
Advertisement
Table of Contents
