Table of Contents
Advertisement
• PUK CODES
The PUK (Personal Unblocking Key) and PUK2 codes are 4- to 8-digit codes
that also usually come from your service provider along with the SIM card.
The PUK code unblocks a blocked PIN code, and the PUK2 code unblocks
a blocked PIN2 code.
If you block your phone, you may need to contact your service provider.
When you enter the PUK code given by your service provider, the phone
will ask you to enter and then confirm a new PIN code.
• SECURITY CODE
Note: The default security code is 12345.
You need the security code to access some security features. When the
phone requires the security code, it displays Security code:
Enter the code then press OK.
If you enter an incorrect security code five times in a row, the phone will
not accept the correct code for 5 minutes.
Change the security code
1 Press Menu 4 8 6 (Settings > Security settings > Change access codes).
2 Scroll to Change security code and press Select.
3 Enter the current security code, then press OK.
4 Enter the new security code, then press OK.
5 Enter the security code again to verify, then press OK.
Important: Keep the code secret and in a safe place, separate from
the phone.
• USE FIXED DIALING
If supported by your SIM card, this feature lets you restrict your outgoing
calls to phone numbers included in the fixed dialing list or beginning with
the same digit(s) as an entry in the list.
Manage phone security
[ 85 ]
13
Advertisement
Table of Contents
