Operation Of Ignition Switch; Use Of Buttons - Sym JOYRIDE 125 User Manual

OPERATION OF IGNITION SWITCH

ON
"Start" position
• Engine can be started in this position.
• Ignition switch key can not be removed.
"Stop" position
OFF
• Engine is shut off and can not be started in this
position .
• Ignition switch key can be removed.
LOCK
"Steering handle lock" position
• Turn the steering handle to left and press ignition
switch key down and then lightly turn it to left to the
"LOCK" position.
• The steering handle is locked in this position.
• Ignition switch key can be removed.
• When unlocking, simply turn the key from "LOCK" to "OFF."
OPEN "Seat open" position
• How to open : Insert your key into the ignition
switch, and turn it to the left.
• How to lock : Push the seat and it locks
automatically.
CAUTION:
• Never operate the ignition switch key when the motorcycle is running. To turn the ignition
switch to "OFF" and "LOCK," will shut off the electrical system and that may result in a
dangerous accident. Therefore, the ignition switch can only be turned off after the motorcycle
has been completely stopped.
• Always remove the key and be sure to take the key away with you after locking the steering
handle before leaving your motorcycle.
• If ignition switch remains in the "ON" position for a prolonged period after the engine has been
stopped, the battery's capacity will be reduced and this may affect the engine's start ability.

USE OF BUTTONS

Passing switch
High/Low
Beam Switch
Turn Signal Switch
Horn Switch
For LA18W only
Seat Open switch
High/Low
Beam Switch
Turn Signal Switch
Horn Switch
IGNITION SWITCH
CAUTION:
Make sure to take the key away with you
before you lock your seat.
Light Switches
8
Engine Stop
Switch
Electrical Starter
Button