How To Connect The Xbox; How To Connect Playstation2 (Ps2); Positioning Of The Speakers - Teac PowerMax-950 User Manual

How to connect the XBOX

To enjoy Dolby Digital Sound over an
optical cable with a XBOX you have to
install the enclosed adapter at the opti-
cal interface. Please carry out the follow-
ing steps:
1. Remove the installed AV cable if there
is any.
2. Plug the enclosed adapter into the AV
output of the XBOX.
3. Connect the AV cable with the adapt-
er installed in step 2.

How to connect PlayStation2 (PS2)

1. Connect the PlayStation2 and the
PowerMax-950 with the provided coax
cable.
2. Switch the PlayStation2 to on without
any CD/DVD inserted.

Positioning of the Speakers

Speaker placement plays an important
role in the reproduction of Surround
sound. The manner in which the speak-
ers are placed varies depending on the
size of the room and the wall coverings
used in the room. The illustration below
4. Remove the dirt protection cover of
the optical output which is located on
the side of the adapter.
5. Connect the optical cable to the adapt-
er and plug its other side into the de-
coder device of the PowerMax-950.
Now activate the Dolby Digital mode of
your XBOX. To achieve this you have to
switch on your XBOX without any CD/
DVD inserted in its drive. Then select
settings / audio and activate "Dolby
Digital".
3. Select in the menu system configura-
tion the option "digital out" and set it
to on.
shows an example of a layout for stand-
ard speaker placement. Refer to this ex-
ample when positioning the speakers in
order to experience the best of Surround
sound.
26