Home Theater Connections; Connecting Equipment With Hdmi Terminal (Tv, Dvd Recorder, Etc.) - Panasonic SC-HTR200 Operating Instructions Manual

Home Theater connections

Connecting equipment with HDMI terminal (TV, DVD recorder, etc.)

Connection cable
HDMI cable (not included)
HDMI cable notes
• Use a Panasonic HDMI cable for best results.
• To enjoy 1125p (1080p) images, use a Panasonic cable shorter than 5.0 m to avoid image deterioration.
Attaching and securing the ferrite core (included) near to the terminal
1
Pull back
the tabs (in
two places)
to open.
By using the connection shown on this page,
video and audio signals are sent to the television
even if this unit is turned off. This is useful when
you want to enjoy late night viewing only with the
television's speakers.
14
RQTV0311
HDMI input
Amplifier
HDMI Video/ audio out
2
Put the
cable and
close until
you hear
'click'.
Optical fibre cable (not included)
Digital audio out
(optical)
Connect this so you can enjoy
surround effects with audio
from your television.
For analogue connection, refer
to "Connecting analogue audio
for TV" ( page 16).
Blu-ray Disc player/DVD recorder, etc.
3
Hole
Using HDMI Standby
Note
When you turn this unit off, the audio/video signals from
a recorder connected to this unit's BD/DVD HDMI input
terminal are output through the television, even if you
have set input on this unit to anything other than "BD/
DVD" ( pages 20 and 21). (The selector returns to the
previous setting when you turn this unit on again.)
TV
Connecting the optical
fibre cable
Note the
shape
and fit it Do not bend!
correctly
into the
terminal.
4
Insert the
included
cable tie into
the hole.
Secure the
cable tie.