Panasonic SC-HTR200 Operating Instructions Manual page 11

A
Shelf assembly
1
Fully insert the metal dowels (included) in holes
front and back which are at the same height.
Do the same for the opposite side.
2
Put the shelf (included) on the metal dowels so they
fit into the prepared holes in the shelf.
• Change the position of the dowels to move the
shelf up or down.
B
Glass door assembly
1
Insert the hinge (included) into the hole so the
screw faces into the unit.
2
Insert the glass door (included) into the upper
and lower hinges and screw in place to hold the
door temporarily.
• The illustration shows how to assemble the left
door.
• VIERA Link and other logo marks are on the
right door.
3
Adjust the height and gap of glass door, then
tighten the upper and lower screws with a
Phillips-head screwdriver.
• Assemble the other door in the same way.
• Do not over-tighten the screws.
• Use a Phillips-head screwdriver that matches
the size of the screws.
Hole
Metal dowel
Hole
Under the shelf
Shelf
Hinge
Hole
Left door
Inner side of door
Screw
Inner side of door
Upper hinge
Edge
Lower hinge
Phillips-head
screwdriver
11
RQTV0311