Message Display - Panasonic LUMIX DMC-LS1GC Operating Instructions Manual

Digital camera model no dmc-ls1gc; dmc-ls1sg
Hide thumbs Also See for LUMIX DMC-LS1GC:
Table of Contents

Advertisement

Message Display

Confirmation messages or error messages
will be displayed on the screen in some
cases.
Major messages are described below as
examples.
[CURRENT BATTERY TYPE SETTING:
OXYRIDE] / [CURRENT BATTERY TYPE
SETTING: ALKALINE/Ni-MH]
If the type of batteries in use is different
from the one indicated in the message,
select the type of batteries on [BATTERY
TYPE] in the [SETUP] menu. (P23)
[THIS MEMORY CARD IS PROTECTED]
Unlock [LOCK] of the Write-Protect switch
on the SD Memory Card. (P19)
[NO VALID IMAGE TO PLAY]
Play back after recording or after inserting
a card with a recorded picture.
[THIS PICTURE IS PROTECTED]
After cancelling the protect setting, delete
or overwrite the picture.
[THIS PICTURE CANNOT BE
DELETED ] / [SOME PICTURES CANNOT
BE DELETED]
The pictures not based on the DCF
standard cannot be deleted.
[CANNOT BE SET ON THIS PICTURE ] /
[CANNOT BE SET ON SOME PICTURES]
If the pictures are not based on the DCF
standard, the DPOF print cannot be set.
[NO ADDITIONAL DELETE SELECTIONS
CAN BE MADE]
You have exceeded the number of pictures
that can be set at once with [MULTI
DELETE]. Once delete the selected
pictures and then repeat deleting multiple
pictures.
94
VQT0Q72
Others
[NOT ENOUGH SPACE ON BUILT-IN
MEMORY] / [NOT ENOUGH MEMORY IN
THE CARD]
There is no space left on the built-in
memory or the memory card.
• When you copy pictures from the built-in
memory to the memory card (batch copy),
the pictures are copied until the capacity
of the card becomes full.
[SOME PICTURES CANNOT BE
COPIED] / [COPY COULD NOT BE
COMPLETED]
Pictures described below cannot be
copied.
• When there is a picture with the same
name as the picture you want to copy on
the copy destination.
• Files which do not comply with DCF
standard
Moreover, pictures recorded or edited by
other equipment may not be copied.
[BUILT-IN MEMORY ERROR
FORMAT BUILT-IN MEMORY?]
This message will be displayed when you
format the built-in memory on the PC or
remove the batteries without turning the
camera off. Format the built-in memory on
the camera again. The data on the built-in
memory will be deleted.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-ls1sg

Table of Contents