Panasonic SC-HT545W Operating Instructions Manual page 7

∫ Television with COMPONENT VIDEO IN terminals
The COMPONENT VIDEO OUT terminals provides a purer
picture than the S-VIDEO OUT terminal. These terminals
can be used for either interlaced or progressive output.
Connection using these terminals outputs the colour
difference signals (P /P
B R
separately in order to achieve high fidelity in reproducing
colours.
Back of this unit
Television
(not included)
COMPONENT
AUDIO
VIDEO IN
OUT
P
L
P
R S-VIDEO
IN
Y
§
This audio connection will enable you to play audio from your television through your home theater system.
Refer to "Operating other equipment" (➜ page 39, Operations Guide).
To enjoy progressive video
≥ Connect to a progressive output compatible television.
≥ Set "Video Output Mode" to "480p" or "576p", and then follow the instructions on the menu screen (➜ page 28,
Picture Menu, Operations Guide).
≥ Panasonic televisions with 625 (576)/50i·50p, 525 (480)/60i·60p input terminals are progressive compatible.
Consult the manufacturer if you have another brand of television.
) and luminance signal (Y)
r
s
§
Audio cable
(not included)
VIDEO IN
B
R
≥ The description of the component video input terminals
depends on the television or monitor
(e.g. Y/P
B
the same colour.
≥ When making this connection, select "Video/YPbPr"
(Video and YPbPr) or "S-Video/YPbPr" (S-Video and
YPbPr) from QUICK SETUP (➜ page 11). If "RGB/No
Output" (RGB only) is selected, the RGB signal is output
from the SCART (AV) terminal, but no signal is output
from the component video output terminals.
COMPONENT VIDEO OUT COMPONENT VIDEO OUT
Y
L
P
B
R
P
R
VIDEO VIDEO S-VIDEO S-VIDEO
AUX AUX
Digital Transceiver
OUT OUT OUT OUT
Video cables
(not included)
7
/P , Y/B-Y/R-Y, Y/C /C ). Connect to terminals of
R B R
AV