Digital Transceiver Connection; Audio, Video And Radio Connections - Panasonic SC-HT545W Operating Instructions Manual

3

Digital transceiver connection

STEP
4

Audio, video and radio connections

STEP
≥ Do not connect through the video cassette recorder.
Due to copy guard protection, the picture may not be displayed properly.
≥ Turn the television off before connecting, and refer to the television's operating instructions.
Connecting to a television with SCART (AV) terminal
To improve picture quality, you can change the video signal output from the SCART (AV) terminal.
Select "RGB/No Output" from QUICK SETUP (➜ page 11).
≥ This connection will also enable you to play audio from your television through your home theater system.
Refer to "Operating other equipment" (➜ page 39, Operations Guide).
Back of this unit
Scart cable (not included)
≥ To listen to the sound from the
television, select the appropriate
audio out (e.g., Monitor) on the
television.
Sound from the television
Press [EXT-IN] to select the "TV" audio input
on the remote control (➜ page 39,
Operations Guide).
Digital transceiver
This unit
r
L
s
R
AUX AUX
FM ANT
75
COMPONENT VIDEO OUT
Y
P
B
P
R VIDEO Digital Transceiver
S-VIDEO
OUT OUT
COMPONENT VIDEO OUT
Y
P
B
P
R
VIDEO VIDEO S-VIDEO S-VIDEO
Digital Transceiver
OUT OUT OUT OUT
5
Insert the digital transceiver
into the slot.
Do not insert or remove
while this unit is on.
Digital transceiver
Insert fully until you hear a click.
AV
Television
(not included)