Panasonic VDR-D150EB Operating Instructions Manual page 36

LSQT1048(ENG).book 36 ページ ２００６年２月６日 月曜日 午後２時１３分
Setting date and time
∫ Changing the display style
Press the MENU button, then select [
DATE FORMAT] # desired display style and press the joystick.
[
Display style
Screen display
∫ Changing the date and time display style
Press the MENU button, then select [
# desired display style and press the joystick.
[DATE]
15.12.2006
≥ The recording time is not displayed in disc playback mode.
≥ The date and time function are driven by a built-in
lithium battery.
≥ Make sure to check the time before recording.
≥ If [0] or [- -] is indicated when this unit is turned
on, then the built-in lithium battery runs down. After
charging the battery using the steps below, set the
clock.
Connect the AC adaptor to this unit or place the
battery on this unit, and the built-in lithium battery
will be recharged. Leave this unit as is for approx.
24 hours, and the battery will save the date and time
for approx. 6 months. (Even if the OFF/ON switch is
set to OFF, the battery is still being recharged.)
36
LSQT1048
SETUP] #
Y/M/D M/D/Y
15:30 15:30
2006.12.15 12.15.2006
SETUP] # [
[D/T] [OFF]
15:30
15.12.2006
D/M/Y
15:30
15.12.2006
DATE/TIME]
WARNING
THE LITHIUM BATTERY IN THIS
EQUIPMENT MUST ONLY BE REPLACED
BY QUALIFIED PERSONNEL. WHEN
NECESSARY, CONTACT YOUR LOCAL
PANASONIC SUPPLIER.