Basic Functions - Strong 5-IN-1 User Manual

GB

Basic functions:

1. STANDBY ON/OFF – Switches the device ON or OFF.
2. LED indicator – Blinks when remote control buttons are pressed.
3. TV – TV mode. Press this button to control your TV set.
4. SET – Used for programming other devices, such as VCR/DVD-Player etc.
5. VCR – VCR mode. Press this button to control your VCR.
6. STB2 – Second set top box mode. Press this button to controlyour second STB.
7. DVD – DVD-Playermode. Press this button to control your DVD-Player.
8. STB1 – Default button for Strong SRT 6125/6155/6355 digital satellite receivers.
9. TV/RAD – Switches between TV or Radio mode in STB1 mode.
10. FAV – Displays the list of favourite channels in STB1 mode.
11. Mute – Enables or disables the sound Mutes in all modes
12. SUB – Display subtitles of broadcast in STB1 mode Used for stepping through
the channels or navigating within the OSD Menus in STB1 mode.
13. CHANNEL Up/Down – Used for stepping through the channels or
14. VOL Left/Right – Used for adjusting the volume or for navigating
15. OK – In SAT1 mode: To confirm actions in the menu systems. In view
mode: Displays the current channel list. (For example TV, Radio or
Favourite). In VCR/DVD-Player mode: Selects PLAY function.
16. SAT – STB1 mode: Displays the list of satellites which have previously
installed channels.VCR/DVD-Player mode: STOP function.
17. TEXT – Enables / disables Teletext in STB1 and TV modes.
18. MENU – STB1 mode: The main menu for setting up the receiver.
19. Information – STB1 mode: Shows program information.
20. BACK – In STB1 and DVD-Player modes: Exits the current OSD (Menu) page. In
TV mode: switches back to previous channels
21. AV – Selects TV or Digital TV
22. PAGE / Plus-Minus – STB1 mode: Scrolling page by page. Page+ for
the next 10 items, Page- for the previous 10 items.
VCR/DVD-Player mode: FORWARD & BACKWARD functions.
23. EPG – Display the EPG (Electronic Program Guide).
24. PAUSE – STB1 mode: Freezes the picture. VCR/DVD-Player mode:
PAUSE function.
25. AUDIO – STB1 mode: Displays all available audio tracks on current
service. It also displays all the available languages.
26. Blue – STB1 mode: The blue coloured button is used for various
functions in the menus. TV mode: Brightness increase function
27. Yellow – STB1 mode: The yellow colour is used for various functions in the
menu. TV mode: Brightness decrease function.
28. Red – STB1 mode: The red colour is used for various functions in the menus.
TV mode: Colour decrease function.
29. Green – STB1 mode: The green colour is used for various functions in
the menu. TV mode: Colour increase function.
Buttons 26-29 – In Teletext mode: Functions according to Teletext content.
30. 0 - 9 Numeric – Direct entry of numerical functions in the menus or in
www.strongsat.com
navigating within the OSD Menus in STB1 mode.
within the OSD Menus (left / right) in all modes.
VCR mode: RECORD function.
channels selection
3