Identifying Code Numbers – From The Automatic Search; Your Code Numbers - Strong 5-IN-1 User Manual

Use following device keys:
for your TELEVISION,
for your VIDEO RECORDER,
for your DVD-PLAYER,
for your SATELLITE RECEIVER – default setting for
STRONG SRT 6125, 6155, 6355
for your second device: SATELLITE RECEIVER / CABLE BOX
3. Press the
means your remote is in code search mode.
4. Press the
OFF. Continue pressing this button slowly with intervals of about 2
seconds between each press until the device is switched OFF.
5. If it switches OFF, press the appropriate device key (e.g.
turn OFF now. Your device code for the selected device is now stored.
6. Aim the remote control at the selected device and press the
Your remote control is set up correctly if the device switches ON;
e.g. VOLUME -/+ or e.g. at VCR/DVD-Player:
7. If the selected devices operated incorrectly, repeat step 2 to step 6.
Note: If a key is not pressed within 30 seconds in the search mode, the
remote will stop the search.
Identifying CODE numbers – from the automatic search:
1. Press the
and release.
Note: If the LED does not blink at all, the corresponding code for the first
digit is 0.
2. Count the number of times the LED blinks and record this number.
3. Continue by pressing
blinks then record this number. For the second digit.
4. Continue by pressing
LED blinks then record this number for the third digit. You have now
identified the 3-digit code from the search.
Example: Key
number is [0], key
number is 028.
If you think that the searching process is too slow, you can advance the
database searching process by pressing

Your Code Numbers

For future reference please record your CODE numbers in the fields for your
devices:
TV
2
key again, and then the LED should start blinking which
key on remote and check if your device (e.g. TV) switches
key on the remote control. Now press both
&
&
does not blink at all, it means the 1st digit of the code
blinking 8 times means 3rd digit is [8], therefore the code
VCR DVD-Player
and count the number of times the LED
and count the number of times the
blinking twice means 2nd digit is [2], key
button.
STB 1
). LED light will
key can be operated.
&
STB 2
www.strongsat.com
GB
key.
key