SoundCraft NOTEPAD 102 User Manual page 11

13 MAIN METERS
14 MONITOR OUTPUTS
(¼" Jack)
15 MONITOR/PHONES CONTROL This controls the level of the signal sent to your monitoring system and signal sent
16 HEADPHONES (¼" Jack)
17 FX SEND/AUX OUTPUT
(¼" Jack)
18 STEREO INPUTS
(¼" Jack, and RCA on
Notepad 102)
19 2-TRACK INPUTS (RCA Phono) You can connect the playback from your recording device or CD/MP3 player here.
20 2-TRACK CONTROLS
21 RECORD OUTPUTS
(RCA Phono)
22 PHANTOM POWER
Notepad 124FX only
23 FX TO MAIN
24 FX TO MON
25 FX PROCESSOR
Notepad 102 and 124 only
26 AUX SEND
27 AUX TO MON
Soundcraft Notepad User Guide
These show the level of the mix outputs. This signal is replaced by the FX or 2-Track
return signals depending upon the settings of the 2-Track and FX switches.
These are used to feed your monitoring system. This can be directly connected to
powered monitors, or indirectly via an amplifier to standard monitors.
to the headphones jack socket.
Plug your headphones into this socket. Recommended headphones impedance is
32 ohms or greater.
This output can be used to send the channel signal to an artist's monitors
(headphones/in-ear/stage monitors). or external FX processor).
These inputs can be used to connect line level stereo inputs from keyboards, sound
modules, samplers, computer based audio cards etc. The Notepad 102 has RCA
Phono sockets on inputs 7&8 and 9&10, set to -10dBV.
Use these to control the 2 Track signal. The TO MON switch sends the signal to the
monitor outputs and phones, whilst the TO MAIN switch sends it to the main mix.
You can connect these to the inputs of your recording device.
Press this to switch the phantom power (48V) on for condenser microphones.
WARNING: Do Not apply Phantom Power before connecting a
microphone.
The rotary control regulates the signal level being fed from the FX processor to the
MAIN MIX L and R outputs.
The FX TO MON switch routes the post-FX signal to the monitor/headphones outputs.
See the information starting on page 24.
h
j
The rotary control regulates the signal level being
fed from the AUX bus to the AUX OUTPUT socket (and
MON output when selected).
The AUX TO MON switch routes the AUX signal to the
Monitor/Headphone outputs.
11