Press 3/4/2/1 to set the departure date (year/
month/day), and then press [MENU/SET]
Press 3/4/2/1 to set the return date (year/month/
day), and then press [MENU/SET].
•
If you do not want to set the return date, press [MENU/SET] while
the date bar is displayed.
Press 4 to select [LOCATION] and then press 1.
Press 4 to select [SET] and then press [MENU/
SET].
Enter the location.
1 Press 3/4/2/1 to select text and then press [MENU/SET] to register.
2 Press 3/4/2/1 to move the cursor to [EXIT] and then press [MENU/SET] to
end text input.
•
Press [DISPLAY] to switch text between [A] (capitals), [a] (lower case) and [&/1] (special
characters and numbers).
Press [MENU/SET] twice to close the menu.
Take a picture.
•
The number of days that have passed since the departure date is displayed for about
5 seconds if this unit is turned on etc. after setting the travel date or when the travel date
is set.
•
When the travel date is set, [—] appears on the lower right of the screen.
Advanced (Recording pictures)
- 91 -