Panasonic LUMIX DMC-FX550 Operating Instructions Manual page 31

x [USB MODE]
•
When [PC] is selected, the camera is connected via the "USB Mass Storage" communication
system.
•
When [PictBridge(PTP)] is selected, the camera is connected via the "PTP (Picture Transfer
Protocol)" communication system.
| [VIDEO OUT]
•
This will work when the AV cable is connected.
[TV ASPECT]
•
This will work when the AV cable is connected.
[TOUCH GUIDE]
[VERSION DISP.]
Preparation
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y [SELECT ON CONNECTION]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
Set to match the colour television system in each country.
(Playback mode only)
[NTSC]: Video output is set to NTSC system.
[PAL]: Video output is set to PAL system.
Set to match the type of TV.
(Playback mode only)
[W]: When connecting to a 16:9 screen TV.
[X]: When connecting to a 4:3 screen TV.
Set the guide screen including Touch AF/AE or Touch Zoom to
display on the LCD or not.
[OFF]/[ON]
It is possible to check which version of
firmware is on the camera.
- 31 -