Colour Bracket - Panasonic LUMIX DMC-FX550 Operating Instructions Manual

³±´²
[REC] mode:
Pressing the shutter button once allows you to take 3 pictures in black and white/standard/
sepia.
Press 3 [È] several times to display
[AUTO BRACKET] and touch [DISPLAY].
•
Touching [DISPLAY] allows you to switch between auto
bracket and colour bracket.
Touch [ ]/[
2
Touch [EXIT].
•
You can also press the shutter button halfway to finish.
Note
•
When setting auto bracket, [
appears on the screen.
•
When taking pictures using auto bracket after setting the exposure compensation range, the
pictures taken are based on the selected exposure compensation range. When the exposure is
compensated, the exposure compensation value appears on the lower left of the screen.
•
The exposure may not be compensated with auto bracket depending on the brightness of the
subject.
•
The auto bracket/colour bracket setting is cancelled if you turn the camera off or
[POWER SAVE] is activated.
•
When auto bracket/colour bracket is set, the auto review function is activated regardless of the
auto review setting. (The picture is not enlarged.) You cannot set the auto review function in the
[SETUP] menu.
•
In shutter-priority AE and manual exposure, if the shutter speed is set to longer than 1 second
auto bracket is disabled.
•
[Œ] is set for the flash when auto bracket/colour bracket is set.
•
Burst is cancelled when auto bracket/colour bracket is set.
•
The one set last will take precedence. (auto bracket and colour bracket cannot be set
simultaneously.)
•
Auto Bracket cannot be used when in [TRANSFORM], [PANORAMA ASSIST],
[HI-SPEED BURST], [FLASH BURST], [STARRY SKY], [PIN HOLE] and [FILM GRAIN] in
scene mode.
Advanced (Recording pictures)

Colour Bracket

] [
to display
1
] appears on the screen, and when setting colour bracket, [
].
- 69 -
]