Using The Menu Screen - Panasonic Digital Palmcorder PV-DV953 Operating Instructions Manual

1
2
CAMERA
3
VCR
CARD P.B.
4
1
2
CAMERA FUNCTIONS
1.CAMERA SETUP
2.ADVANCED FUNCTIONS
3.DIGITAL EFFECT
4.CARD SETUP
5.MULTI-PICTURES
6.RECORDING SETUP
7.DISPLAY SETUP
8.OTHER FUNCTIONS
9.DEMO MODE
PUSH MENU TO EXIT
3
VCR FUNCTIONS
1.PLAYBACK FUNCTIONS
2.DIGITAL EFFECT
3.CARD SETUP
4.MULTI-PICTURES
5.RECORDING SETUP
6.AV IN/OUT SETUP
7.DISPLAY SETUP
8.OTHER FUNCTIONS
PUSH MENU TO EXIT
4
CARD FUNCTIONS
1.DELETE CARD FILE
2.CARD EDITING
3.DISPLAY SETUP
4.OTHER FUNCTIONS
PUSH MENU TO EXIT
DATE/ PHOTO
OSD SHOT
TIME
COUNTER RESET TITLE
MULTI/
¥
REC A.DUB
P-IN-P
V
/REW PLAY FF/
6 1 5
STILL ADV PAUSE STILL ADV
E
;
INDEX STOP INDEX
K L
∫
SELECT
VAR.
SEARCH
STORE
MENU
OFF/ON
P.B.DIGITAL
PICTURE
18

Using the Menu Screen

To facilitate the selection of a desired function or setting, this Palmcorder
displays various function settings on menus.
2, 3, 4, 5
1
1, 2
SHUTTER/IRIS/
VOL/JOG
PUSH
2
3
4
5
≥While a Menu is displayed, you cannot begin to record or play back. Menus
≥The above operations can be carried out using the Remote Controller.
To Exit the Menu Screen
Press the [MENU] Button again.
About the Menu Mode Setting
The setting selected on the Menu will be retained even when the Palmcorder
is turned off. However, if the Battery or AC Adaptor is disconnected before
turning the Palmcorder off, the selected setting may not be retained.
(But, the setup of [EFFECT2] (l 34) is not retained.)
≥Menu operation flow is shown in this text by >>.
ª File Selection in the Card Playback Mode
A File Selection Operation may be necessary during Menu Operations. In this
case, carry out the following procedure.
1
START/
STOP
2
ZOOM
T
W
≥After the above File Selection Procedure, carry out the various Menu
W
D
5
P.B.
ZOOM
7
SET
6
ITEM
8
No.25 100-0012
Press the [MENU] Button.
≥The Menu corresponding to the Mode selected by using the [OFF/ON/
1
MODE] Switch is displayed.
≥When the [CAMERA] Lamp is on, the Camera Function Menu is
2
displayed.
≥When the [VCR] Lamp is on, the VCR Function Menu is displayed.
≥When the [CARD P.B.] Lamp is on, the Card Function Menu is
4
displayed.
Rotate the [PUSH] Dial to select a desired Sub-Menu.
Press the [PUSH] Dial to display the selected Sub-Menu.
Rotate the [PUSH] Dial to select the item to be set.
Press the [PUSH] Dial to set the selected item to a desired
Mode.
≥With each press of the [PUSH] Dial, the cursor [1] brings up a
subsequent Mode. Menu items that cannot be used in combination with
the selected menu items are displayed in dark blue.
can be displayed during playback but not during recording.
(l 12)
≥To display the Menu, press the [MENU] Button
Controller.
≥To select items on the Menu, press the [ITEM] Button
Remote Controller.
≥To set the mode for the selected items, press the [SET] Button
on the Remote Controller.
Turn the [PUSH] Dial and select a file.
≥The selected file is marked by a frame
Press the [PUSH] Dial to confirm the selection of the file.
Operations. (The above procedure will not be repeated in the following
instructions.)
5
on the Remote
6
on the
8
.
3
7