Sanyo SC-CX910 Instruction Manual page 4

CLEAR THE DUST COMPARTMENT /
Remove the dust compartment
and empty dust compartment
as follows.
1. As the arrow shown, turn the
duster knod several times and
waste in dust compartment
will drop out.
2. In figure, push the duster
holder and take the pre-filter
and main filer.
Pre-Filter
3. Clean the pre-filter and main
filter with water.
Allow each parts to dry
completely after cleaning.
Caution:
Do not attempt to dry with a
hair dryer or by placing in a
clothes dryer. Hot air may
cause the filters to warp.
Don't need to wash after
use each time.
4. Insert the main filter into
the pre-filter as shown.
5. Align the ribs of the main filter
to match the shape of the
hole in the dust compartment
and press firmly to insert.
Duster Knod
1.
2.
Duster holder
3.
Main filter
Pre-Filter
4.
5.
Hole
Ribs